Announcement

Collapse
No announcement yet.

back tires

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    did they even align the rear?? it takes shims to do that and most places won't install them or require EXTRA labor to do it...
    Trees aren't kind to me...

    currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
    94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.

    Comment


    • #17
      said they cant align the reear but i agree with bearings

      Comment


      • #18
        Whenever I have any work done on the car that might affect the rear bearings, to include safety inspections, when I get home I jack up the rear wheels and wiggle the wheels to check for play, and then spin them to check for free rotation. These two checks cover too-loose and too-tight bearings. You just shouldn't trust these guys at the shop.
        90 Festy (Larry)--B6M (Matt D. modified B6 head), header, 5-speed, Capri XR2 front brakes, many other little mods
        09 Kia Rondo--a Festy on steroids!

        You can avoid reality, but you can't avoid the consequences of avoiding reality--Ayn Rand

        Disaster preparedness

        Tragedy and Hope.....Infowars.com.....The Drudge Report.....Founding Fathers.info

        Think for yourself.....question all authority.....re-evaluate everything you think you know. Red-pill yourself!

        Comment


        • #19
          sohow much give should the tire give????

          Comment


          • #20
            the tire itself can give quite a bit, but the rim itself shouldn't move when shaken.
            Trees aren't kind to me...

            currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
            94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.

            Comment


            • #21
              Originally posted by FestYboy View Post
              the tire itself can give quite a bit, but the rim itself shouldn't move when shaken.
              And it should spin freely; if it doesn't then the bearings are too tight.
              90 Festy (Larry)--B6M (Matt D. modified B6 head), header, 5-speed, Capri XR2 front brakes, many other little mods
              09 Kia Rondo--a Festy on steroids!

              You can avoid reality, but you can't avoid the consequences of avoiding reality--Ayn Rand

              Disaster preparedness

              Tragedy and Hope.....Infowars.com.....The Drudge Report.....Founding Fathers.info

              Think for yourself.....question all authority.....re-evaluate everything you think you know. Red-pill yourself!

              Comment

              Working...
              X