Tweet
I am in the process of changing my rear drums, shoes and bearings. The problem is that when I assemble everything the drums would not go over the shoes. I pushed that adjuster in all the way and still can't get the drum over them. The shoes are set in right and lined up. I had this problem before...what could the problem be?
-
-
hmm, I had the exact same problem when doing my drums, I ended up using the old drums sadly. Talk to Sasquatch about this, I believe he has some tricks.
-1989 festiva auto to standard conversion, bp g5mr white, aspire swap- October 2010 Festiva of the Month
-1993 festiva stock standard blue, kia rio front struts -
Pull the pin out on the brake cable lever to make sure the shoes are retracted.Comment
-
yep, if i recall is a 'ratchet like' design... so you want to "reset" the ratchet if you have new ones...Originally posted by Mike McKown View Post
-"Hairlipstiva" 1991 GL 5spd (swapped from an auto), rolling on Enkei 14x6 +38 with 195/45/14 Toyo's, Jensen MP5720 CD deck, tach install, LED strip in cluster, down position rear wiper, FMS springs, Gabriel shocks on 4 corners, Acura Integra short shifter
-Escort GT 91 donor car with BP, G5M-R tranny to be dropped in the little guy...
-Aspire brake swap COMPLETE!
https://www.wunderground.com/persona...?ID=KOKOWASS38Comment
-
i am sadley haveing the same problema nd need it done asap. any other ideas???? i believe kingfish is coming over to help in a bit but if any one can help me immediatly give me a call 816-777-7562. names ryan thx guys.Comment
Comment