Tweet
I got the new clutch,pp,TOB and pilot bearing installed everything torqued and now everytime I depress the clutch I get loud scraping sound.. I have tried adjusting it in and out and it still scrapes..now I have to pull the engine again.. I installed a few clutch kits in my day but haven had this one yet..
-
-
Dam you really are celebrating by putting in a new clutch today , isn't the only thing that would make contact to cause that noise would be the pivot for the bearing , surely it's not the bearing on the input shaft, would the cable make that noise ?------------------------------------------------
The Trigger - Midwest Festiva Inc., Illinois Chapter
Smart Passion white with H-D interior
HD2500 Duramax Chevy
Harley Davidson Ultra classic ..I am in love !!
Pro Street S-10 http://www.cardomain.com/ride/2214968
Diamond white Deville 27,000 mile cream puff
Z28 LS1 power 500 +
90 Festy L daily driver wants to be modded, OK
It is being modded , a little at a time http://www.cardomain.com/ride/2214953
Join me on Facebook !! ;http://www.facebook.com/profile.php?...00000295094896 -
And of all the people who venture in here, didn't you read my announcement on posting in here?as on which year, model and mods?
Gee some people, got the nerve! :roll:
Now that i am done bustin your chops:
Does the noise increase with engine speed?or does it do it when the engine is off?Comment
-
I got it.. 1 stupid 10mm bolt that holds the shield... duh...Comment
-
I hope you found it "before" pulling the motor back out!Originally posted by xpnsydComment
-
yeah, sure did.. if ya look at the pics I posted in the gallery forum you'll see why I exhausted every avenue before wrecking my new paint.. I got a few repairs done at the same time though.. I had snapped a bolt off in the head awhile back so I drilled and repaired that. The engine was making a weird wah wah wah sound.. Found out that it was the timing belt tensioneer bearing so I pulled one off 1 of the B3s I have laying around and all is good..Comment
Comment