Ignition Coil

[121madness]

Hey,
I just tested my ignition coil with a mutilmeter and here are the results.

Primary: 1.2 Ohms
secondary: 12,300 Ohms

Thoughts?

[121madness]

Bump
Can anyone shed some light on the test results, want to know if the coil is on the brink?

[Pu241]

Tested hot or cold?

[121madness]

cold

[1988redfordfestiva]

well the way i test like all data says check voltage run current of 12 volts to both side of coil one at a time and check the main coil wire for 12 if both see 12 volts then good coil. if not u need to replace and get a new coil. if coil is good u have a wire grounding out with in or out of your electrical system