Shifter Stabilizer Bar Bushing

[SleightOHand]

Hi all,

I've been driving my Festiva more now that I've got a job and drive 35 miles a day, and some little things that never bothered me are starting to bother me now that I'm spending more time driving. I've been trying to diagnose why my shifter rattles all the time.

I replaced the bushings on the shifter end, but when i was looking at the transmission end I noticed that the bushing for the stabilizer was completely gone. The top part of the bar is resting on the bolt that goes through it and there's maybe 1/4-3/8 inch of movement vertically.

I've searched the forum, but can't seem to find any threads on this. Does anyone know the part number or a good substitute for this bushing?

Thanks

[doylerl]

http://www.fordfestiva.com/forums/showpost.php?p=277775&postcount=26

Mine had the same problem. Also, your shifter may be rattling against the exhaust. Mine did that too.
Nevermind... I just reread your post and you already replaced these...

[SleightOHand]

Yeah, the bushings have made shifts feel a lot better, but the rattle continues. The bushings seem to have damped the rattle a bit and have changed the driving speeds where it gets annoying, so freeway driving is a lot more tolerable. But i want it gone.

[worfdog]

http://www.fordfestiva.com/forums/showthread.php?t=20159

Try this link. I think this is what you want.

[FFW]

Hi all,

I've been driving my Festiva more now that I've got a job and drive 35 miles a day, and some little things that never bothered me are starting to bother me now that I'm spending more time driving. I've been trying to diagnose why my shifter rattles all the time.

I replaced the bushings on the shifter end, but when i was looking at the transmission end I noticed that the bushing for the stabilizer was completely gone. The top part of the bar is resting on the bolt that goes through it and there's maybe 1/4-3/8 inch of movement vertically.

I've searched the forum, but can't seem to find any threads on this. Does anyone know the part number or a good substitute for this bushing?

Thanks

Dude I had the same problem and it annoyed the hell out of me! Simple solution go to a pick and pull junkyard and pull that sucker out! Don't even have to pay it just put it in your pocket Hah that's what I did.

[bravekozak]

BUSH-RUBBER,STABILIZER (MD00134153A) Our Price: $1.82 ea
BUSH-RUBBER,STABILIZER (KKY0134153A) Our Price: $0.91 ea
BUSH-STABILIZER BAR (KKY0134156A) Our Price: $3.50 ea

I don't know which one is the correct Kia part number, but I would order two of each.
Twistiva has already placed an order with Four Green and will be finalizing it tomorrow.

[SleightOHand]

http://www.fordfestiva.com/forums/sh...ad.php?t=20159
Try this link. I think this is what you want.

That looks like exactly what I want. Shipping is a little much ($13.80, and other online retailers seem to want to charge similar amounts) so I'll check the local 4 Wheel Parts store before ordering online.

BUSH-RUBBER,STABILIZER (MD00134153A) Our Price: $1.82 ea
BUSH-RUBBER,STABILIZER (KKY0134153A) Our Price: $0.91 ea
BUSH-STABILIZER BAR (KKY0134156A) Our Price: $3.50 ea

I don't know which one is the correct Kia part number, but I would order two of each.
Twistiva has already placed an order with Four Green and will be finalizing it tomorrow.

Do you know if he is ordering in bulk? Because they want $25 for shipping and for that price I'd rather get the Jeep bushings.