quick q for the carb drivers

[htchbck]

For 100 million points, who can tell me where this vac port is supposed to connect to?



Can't find unused port anywhere, and the motor doesn't seem to have a vac leak. I'm guessing this valve has to something having to do with emissions. Anyway, if someone can tell me (or a pic would double your points ) where this is supposed to connect to I'd be very grateful

[doylerl]

Have you checked your charcoal canister for an open port?

[htchbck]

There weren't any open ports but theres a few long vac lines coming from it. I may have missed an unplugged end somewhere at the opposite end from the canister. I'll check for that right after work. Thanks!

[devon527]

Hey if its not answered by the time I get home I will let you know. I'm tearing my car down so I'm not driving it

[dabird]

on my car it connects to the where the blue plug is on the top right of this photo

[FestYboy]

^ yup, blue dash on vac hose to that solenoid.

[shadetree]

[devon527]

Ha dang just got home and its already answered! I tried at least

[htchbck]

K thanks for the replies Well, this is whack, I just checked mine and that blue line goes down to a "T". One side of the T goes into a "Y" coming out of the charcoal canister, the other side connects to a hard line coming from the intake. Looks like its been there a looong long time, I know I didn't connect it wrong when I put the engine back in, because I unbolted all the solenoid from the firewall when I pulled the engine. None of those lines were disconnected by me. So... Idk. lol