AC Wiring questions

[kartracer46]

I installed an AC system off an ATX car on my MTX car. The question I have is the ATX cars had a seperate condensor fan and a third relay for the WAC if I recall correctly. The only plug that was missing on the install was the connection for the 20amp single plug with the inline fuse. I believe this is the one that supplys the power to the third relay and operates the condensor fan located in front of the condensor coil.

So will the AC system work without it being connected to anything?

If not where can I get a good power supply for it?

I plan to vacuum the system tomorrow and put the refrigerant in so I guess I will see if nobody knows the answer.

[kartracer46]

I think Arty got me straight, he says all I need to do is pull a power source from either the battery or the 30amp seat belt circuit to make it all work. I shall see tomorrow and post the results.

[navdoc101]

Jay, I got a 2nd a/c fan from a atx car. how did you wire yours in? pics or a diagram would help , if you would please. I should receive it by Monday. Pics & diagram inservice manule not very good. Thanks