Since Ford doesn't recommend changing manual transmission oil, the assumption is that it is unnecessary to do so.
My past experience has suggested to me that even worse than "unnecessary" it may be harmful.
When I replaced the original fluid in my 1990 Festiva 5-speed it came out gray and cloudy. I was certain it would shift smoother after the change. It didn't. In fact, the shifting had a harsh quality that was absent when the original dirty looking fluid was running in it. I tried other brands of ATF before going to gear oil, but it was never as smooth as it had been before I changed it.
I replaced the fluid in my Aspire 20 days and 600 miles ago. At first I thought it was maybe a bit smoother, but yesterday I noticed I was shifting it just as I had learned to shift my Festiva, slowly with a slight pause in the middle to allow time for the synchronizers to work. I don't remember having to do that before I changed the fluid.
Here is what I fear is happening. ATF has an additive that keeps particles suspend so that they can circulate through the filter and be trapped there. There is no filter in a manual transmission so keeping particles in suspension is the worst possible thing to do. Particles should be allowed to settle down and stay there.
That is what eventually happens as the additives in the factory fill of ATF loose their effectiveness. When the transmission is new there are few particles to be dispersed and by the time they reach numbers to become harmful the dispersant additive has lost its effectiveness. At that point there is nothing better in that transmission that the original ATF with its exhausted package of additives.
I'm posting this in hopes that some of you will be able to tell me that I am wrong. That the slower shifting of my Aspire is just in my imagination and that it will not get worse as time passes.
I originally thought this first change would act as a flush before adding some Mobil 1 synthetic, but now I'm thinking its additive package would be even more destructive to my poor 5-speed.
Particularly helpful would be reports from people who have looked inside old 5-speeds. Do they normally have a sediment at the bottom which might be harmful if released by fresh ATF to flow through the gears?
Also, I would like to hear if anyone else has noticed poorer performance after adding fresh fluid. In particular, has anyone ever used Mobil 1 ATF in a 5-speed and noticed any improvement?
Can anyone tell me if gear oil has dispersants added to keep particles suspended?
Would there be any way for me to flush my transmission so thoroughly that there would be no particles left to disperse?
My past experience has suggested to me that even worse than "unnecessary" it may be harmful.
When I replaced the original fluid in my 1990 Festiva 5-speed it came out gray and cloudy. I was certain it would shift smoother after the change. It didn't. In fact, the shifting had a harsh quality that was absent when the original dirty looking fluid was running in it. I tried other brands of ATF before going to gear oil, but it was never as smooth as it had been before I changed it.
I replaced the fluid in my Aspire 20 days and 600 miles ago. At first I thought it was maybe a bit smoother, but yesterday I noticed I was shifting it just as I had learned to shift my Festiva, slowly with a slight pause in the middle to allow time for the synchronizers to work. I don't remember having to do that before I changed the fluid.
Here is what I fear is happening. ATF has an additive that keeps particles suspend so that they can circulate through the filter and be trapped there. There is no filter in a manual transmission so keeping particles in suspension is the worst possible thing to do. Particles should be allowed to settle down and stay there.
That is what eventually happens as the additives in the factory fill of ATF loose their effectiveness. When the transmission is new there are few particles to be dispersed and by the time they reach numbers to become harmful the dispersant additive has lost its effectiveness. At that point there is nothing better in that transmission that the original ATF with its exhausted package of additives.
I'm posting this in hopes that some of you will be able to tell me that I am wrong. That the slower shifting of my Aspire is just in my imagination and that it will not get worse as time passes.
I originally thought this first change would act as a flush before adding some Mobil 1 synthetic, but now I'm thinking its additive package would be even more destructive to my poor 5-speed.
Particularly helpful would be reports from people who have looked inside old 5-speeds. Do they normally have a sediment at the bottom which might be harmful if released by fresh ATF to flow through the gears?
Also, I would like to hear if anyone else has noticed poorer performance after adding fresh fluid. In particular, has anyone ever used Mobil 1 ATF in a 5-speed and noticed any improvement?
Can anyone tell me if gear oil has dispersants added to keep particles suspended?
Would there be any way for me to flush my transmission so thoroughly that there would be no particles left to disperse?
Comment