Tweet
Originally posted by Kbaker2012
View Post
-
Did you disconnect and remove your ECU? You also won't need your barometric sensor. -
Did you disconnect and remove your ECU? You also won't need your barometric sensor.
where is the disconnect and ECU where is the barometric sensor. I pulled the CEL bulbComment
-
Weber Carb
the carb is ALOT better !!!!!!Comment
-
can you send any pics of the barometric sensor and which wires to disconnect for the ECUComment
-
Very cool!!!!! :mrgreen:Originally posted by Kbaker2012 View PostDan
Red 1988 Festiva L - CUJO
Black 1992 Festiva GL Sport - BLACK MAGIC
I'm just...a little slow... sometimes:withstupid:
R.I.P.
Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
Black on black 1976 Camaro LT-350 4 bolt main .060 over
Silver 1988 Festiva L
My Music!
http://www.reverbnation.com/main/sea...t_songs/266647Comment
-
The barometric sensor thing is the 5/8 square black plastic looking thing on the disty, and has a single wire to the coil.Originally posted by Kbaker2012 View PostDan
Red 1988 Festiva L - CUJO
Black 1992 Festiva GL Sport - BLACK MAGIC
I'm just...a little slow... sometimes:withstupid:
R.I.P.
Blue 1972 Chevelle SS-468 C.I.D. B'nM TH400-4:56 posi-Black racing stripes-Black vinyl top-Black int.
Black on black 1976 Camaro LT-350 4 bolt main .060 over
Silver 1988 Festiva L
My Music!
http://www.reverbnation.com/main/sea...t_songs/266647Comment
-
The ECU is under the left side of the dash. There are three yellow connectors going into it.
Just unplug them. It is mounted on a plate.Comment
Comment