My car was clicking when going around curves, my cousins s10 was popping really loud like in mcds parking lot, in slow motion turns, both instances were cured with new axels. The hub being hot is probably an unrelated problem, like a bad bearing, seized calipers, or brakes dragging. Check for the pad retainer clips next time you take the tire off, and make sure both tires spin freely.
Announcement
Collapse
No announcement yet.
Front end noise... Need a second opinion
Collapse
X
-
2008 Kia Rio- new beater
1987 F-150- revived and CLEAN!!!
1987 Suzuki Dual Sport- fun beater bike
1993 Festiva- Fiona, DD
1997 Aspire- Peaspire, Refurb'd, sold
1997 Aspire- Babyspire, DD
1994 Aspire - Project Kiazord
1994 Aspire- Crustyspire, RIP
"If it moves, grease it, if it don't, paint it, and if it ain't broke don't fix it!"
-
You shouldn't have to lossen any sway bar bushing to replace an axle. I did it by removing the bolts from the strut and the pinch bolt off the end of the lower control arm (next to the ball joint). You have to push down on the control arm. Well, yes, I also had to remove the nut from the end of the axle.Original owner of silver grey carburetted 1989 Festiva. 105k km as of June 2006. 140k km as of June 2021.
Comment
Comment