Announcement

Collapse
No announcement yet.

Afraid I may have screwed up mounting wing on wife's car.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Afraid I may have screwed up mounting wing on wife's car.

    I tried using expanding rubber plugs, used 1/2" holes. Somehow I got the wing a bit too far forward and it hit the roof and pulled the front plugs out. Not sure what to do now.
    1963 Fairlane - future NSS drag car
    1965 Mustang Coupe - A-code car, restoring for/with my son
    1973 F100 longbed - only 22k original miles, 360/auto, disk, PS/PB dealer in dash A/C
    1996 Sonoma X-cab - son's DD
    2002 Grand Prix - daughter's DD
    2003 Sport Trac - 180k, 130k on replaced motor with new timing chains - F/S soon.
    2005 Accord - wife's DD
    2008 Mountaineer - step daughter's DD
    2015 F150 SCrew - DD

  • #2
    ouch!,,,,weld in patches and redo.
    "FLTG4LIFE" @FINALLEVEL , "PBH"
    89L Silver EFI auto
    91GL Green Auto DD
    There ain't no rest for the wicked
    until we close our eyes for good.
    I will sleep when I die!
    I'm a little hunk of tin, nobody knows what shape I'm in. I've got four wheels and a running board, I'm not a Chevy, I'M A FORD!

    Comment


    • #3
      Seems like a hatch swap and repaint might be easier.... I've tried welding on this thin metal and it's tough.
      1963 Fairlane - future NSS drag car
      1965 Mustang Coupe - A-code car, restoring for/with my son
      1973 F100 longbed - only 22k original miles, 360/auto, disk, PS/PB dealer in dash A/C
      1996 Sonoma X-cab - son's DD
      2002 Grand Prix - daughter's DD
      2003 Sport Trac - 180k, 130k on replaced motor with new timing chains - F/S soon.
      2005 Accord - wife's DD
      2008 Mountaineer - step daughter's DD
      2015 F150 SCrew - DD

      Comment


      • #4
        I think I figured out a solution. I'll cut out oversized sheet metal patches and tape them down. Then I'll position the wing and tape it down and make sure it clears (didn't dawn on me to do this before). Mark the holes with the drill and pull them off and finish drilling them, then weld a nut on the back and weld them in place.
        1963 Fairlane - future NSS drag car
        1965 Mustang Coupe - A-code car, restoring for/with my son
        1973 F100 longbed - only 22k original miles, 360/auto, disk, PS/PB dealer in dash A/C
        1996 Sonoma X-cab - son's DD
        2002 Grand Prix - daughter's DD
        2003 Sport Trac - 180k, 130k on replaced motor with new timing chains - F/S soon.
        2005 Accord - wife's DD
        2008 Mountaineer - step daughter's DD
        2015 F150 SCrew - DD

        Comment


        • #5
          Sounds like a lot of work, just sell it to me, problem solved.
          An idea can turn to dust or magic, depending on the talent that rubs against it.

          Comment


          • #6
            Of course you'll want a discount due the the messed up holes in the hatch....
            1963 Fairlane - future NSS drag car
            1965 Mustang Coupe - A-code car, restoring for/with my son
            1973 F100 longbed - only 22k original miles, 360/auto, disk, PS/PB dealer in dash A/C
            1996 Sonoma X-cab - son's DD
            2002 Grand Prix - daughter's DD
            2003 Sport Trac - 180k, 130k on replaced motor with new timing chains - F/S soon.
            2005 Accord - wife's DD
            2008 Mountaineer - step daughter's DD
            2015 F150 SCrew - DD

            Comment

            Working...
            X