escort gt swap no HP!!

[RhodeStiva]

U

[RhodeStiva]

Does the ecu need to be mounted so it has a ground because mine is not.

[FestYboy]

the chassis should be grounded, but there should also be enough grounds through the harness as to not REQUIRE the chassis to be grounded.

[Festevil3]

Does the ecu need to be mounted so it has a ground because mine is not.

in my experience NO, I drove Festycul around for a few months with the ECU just hanging

[RhodeStiva]

i might have a miata ecu in. that could be the only thing left to check.

[Flyin4stroke]

What are the numbers in it?

[RhodeStiva]

Would not having the iacv plugged mess it up? And I will check the numbers when I get home.

[FestYboy]

iac controls cold idle ONLY. having it plugged will not affect the power in any way.

[RhodeStiva]

ok thanks

[RhodeStiva]

The ecu came out of a 90 323. BP01

[Festevil3]

The ecu came out of a 90 323. BP01

323's had BP's?

[RhodeStiva]

The one I got this from did.

[bhazard]

That's a B8 ECU dude! Pretty sure of that.

[RhodeStiva]

You can't read the numbers at all I just wrote down with a sharpie on the ecu when I pulled it. And I only pull BP ecu so assumed that was the number but with further looking that's couldn't be it because that is for a sohc. So disregard the number. But it did come out of a 323 and it had a protege BP so I assumed when I pulled it it would work. I am goin to the JY on Friday to find another.

[bobbyspider]

Bro you are gonna be all grins when you hit the gas and its running properly