So it's was my first time dropping an auto teams on my ford festiva to repair the torque converter seal. I replaced the seal and seated the torque converter and reinstalled the box. Anyways once put back together I refilled the fluid and all was well to drive. To the issue about 2 hrs later the vehicle began to slip and the rpm would raise but the vehicle wouldn't go anywhere. It was also very jerky and ruff on shifts and would prolong before shifting. I'm not sure if a cable maybe installed wrong or topping up the auto trans down the dipstick was possibly wrong?
If anyone has any ideas of what to test or possibly the cause that'd be great!
Cheers.
If anyone has any ideas of what to test or possibly the cause that'd be great!
Cheers.
Comment