There are 2 wires that go into a small plastic box on the underside of the assembly.If these get pulled out what is the best method of repair?
Announcement
Collapse
No announcement yet.
Ignition switch and wiring harness
Collapse
X
-
Those are for the "key in left in ignition"alarm and can be capped with no effect except loss of that warning. I had them pull out and don't know if it's repairable. In my case the box broke open and didn't seem that it would be repairable. If you buy a new replacement from Fourgreen, it's not present nor is the other two wires in the white 4 wire plug. The other 2 wires are "panel brake lamp test" which lights the "brake lamp" when the ignition is in the start position."Blue92"- 92L 5 spd, original owner- 185K, B8,DD..
"Pedro"-88L 5-spd, B6D (built by Advancedynamix)
"Blanca"-92 GL auto, 125K(FM8 Lowest Miles)- B6 daughter's DD
"Tractor Blue"- 89 L auto, 110K
"Chester"-88 LX, runs but not street legal
"Wenona"-89L parts car
"Flame"- 89 LX 5 spd ,parts car
Comment