You want just the cable off or the gear out?
To remove the gear once you have the 10mm bolt out you just pull and twist and yank.
To get just the cable off you unthread the top part from the speedo gear.
What Screw? The 10mm bolt on the hold down tab? There is a Cable Retainer thing that has a 19mm Hex Head that you can unscrew and just pull the Speedo Cable out.
"The White Turd" 1993 Festiva 144k miles. (Winner of FOTM November 2016)
sigpic
"The Rusty Banana" 1990 Yellow 5 Speed Mud Festiva (Lifted with 27" BKT Tractor Tires)(Winner of "Best Beater Award" - Madness 12 - 2018)
"Papa Smurf" 1992 Blue 5 Speed Shell
"Cracker?" (name pending) 1992 White Auto Shell (Future BP Swap)
"Green Car..." Scrap Car that Runs?!?
"Red Car..." Complete Scrap Car
And do not under any circumstances try to pry the gear up using a screwdriver. That tab breaks easily.
Use a 19mm open end wrench to loosen the speedo cable.
Looks like were posting at the same time firebush..
Comment