Announcement

Collapse
No announcement yet.

Rear hatch loose brackets

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Rear hatch loose brackets

    There are 2 pieces of metal in my back hatch that are attached to the innner skin but not the outer. Looks like they just flap around. What are they for and should i double-side tape them to the outer skin so they dont rattle? This photo is with the hatch open.


    Sent from my SM-G920W8 using Tapatalk
    Tags: None
  • #2
    I'm not sure what they would be for but if it were mine I would put something under it so it didn't rattle.
    "The White Turd" 1993 Festiva 144k miles. (Winner of FOTM November 2016)
    sigpic
    "The Rusty Banana" 1990 Yellow 5 Speed Mud Festiva (Lifted with 27" BKT Tractor Tires)(Winner of "Best Beater Award" - Madness 12 - 2018)

    "Papa Smurf" 1992 Blue 5 Speed Shell
    "Cracker?" (name pending) 1992 White Auto Shell (Future BP Swap)
    "Green Car..." Scrap Car that Runs?!?
    "Red Car..." Complete Scrap Car

    "El Flama Blanca" 1993 Festiva 104k miles. (Lil Brothers Car)
    https://drive.google.com/file/d/0BzM...ew?usp=sharing

    Comment

    • #3
      Don't see those on my car. Wedge a piece of cardboard or something into the gap and maybe tape it in place.
      Last edited by WmWatt; 04-26-2017, 06:21 PM.
      Original owner of silver grey carburetted 1989 Festiva. 105k km as of June 2006. 140k km as of June 2021.

      Comment

      • #4
        Originally posted by WmWatt View Post
        Don't see those on my car. Wedge a piece of cardboard or something into the gap and maybe tape it in place.
        Huh, ok. I will just use thick double sided tape to hold them down.

        Sent from my SM-G920W8 using Tapatalk

        Comment

        Previous template Next
        Working...
        X