problems please help

[gpysy]

i have ford festiva 1991 i think 3 door 4 speed manual
46500966_201109730803689_4759103508072890368_n.jpg46407196_264069724298675_8427149460261306368_n.jpg46329386_2027865363967745_5726735794203262976_n.jpg46485776_1830883763706261_6232458533925814272_n.jpg46381413_330054751110283_1614168603848867840_n.jpg
i have not a clue there is rubber tubing that attaches to the engine some of them dont have tubes attached does anyone have a diagram on where the tubes are meant to be please
the clutch has just been replaced when i put my foot on the clutch to change gear to turn the corner when i put foot on break the engine is over revving to the point i have to turn it off if any one can help me.
i have attach photos so u can see my car and the problem .

[WmWatt]

I don't know of a vacuum hose chart for the Festiva. The hoses are colour coded which may help. If you search this forum on, say, "vaccum hoses" you might find some photos which would help. I've seen posts here asking about hoses with photos.

[gpysy]

thank you wmwatt some of them have colour on them them ones are ok its the ones are black no colour thats the problem

[w4rkry]

I have vacuum diagrams for a USDM Festiva, but your carb system is different than the US ones.

[gpysy]

think ,mine is a Japanese model

[WmWatt]

His car is not carburetted

[w4rkry]

His car is not carburetted

What makes you say that?

Sent from my SM-N910C using Tapatalk

[ricko1966]

At the least it has a fuel pump for a carby model.

[WmWatt]

^^ model year but now I look at the photos it has the big round air filtre housing on top of the carburetor. I notice one difference. His pulse air device on the air filtre housing only has one large diameter hose, mine has two.

[w4rkry]

^^ model year but now I look at the photos it has the big round air filtre housing on top of the carburetor. I notice one difference. His pulse air device on the air filtre housing only has one large diameter hose, mine has two.

Other countries didn't get the Carb or EFI systems that we did in the US. Australia didn't get EFI first gens at all even.

Sent from my SM-N910C using Tapatalk

[F3BZ]

hmm. i think the 91 jdm festiva i bootlegged over here has just 1 of those reed valve housings on the air cleaner and it's RHD too. maybe i can get him some pics when i get up to the garage. what's interesting is i thought japanese (mazda) festivas were only sold in japan. maybe not. gypsy, does your car have a VIN plate riveted to the firewall that says 'manufactured by mazda motor corp.' or made in japan?