Announcement

Collapse
No announcement yet.

Circuit boards for clusters.

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Circuit boards for clusters.

    I noticed you guys are posting pics of the circuit board for the clusters and i didnt realize there was a difference between the orange face and the white face. There isnt any difference in the way the connect right? Also, I have heard that even on the non tach versions, there was a connection for the tach signal.. does anyone know which one this is?
    Thanks
    RJV
    Tags: None
  • #2
    They are working on the 110 mph speedo .
    I put a white faced tach in mine 85 mph .
    It had just a speedo to begin with , I swapped the tach dash in with no modifications , plug and play
    ------------------------------------------------
    The Trigger - Midwest Festiva Inc., Illinois Chapter
    Smart Passion white with H-D interior
    HD2500 Duramax Chevy
    Harley Davidson Ultra classic ..I am in love !!
    Pro Street S-10 http://www.cardomain.com/ride/2214968
    Diamond white Deville 27,000 mile cream puff
    Z28 LS1 power 500 +
    90 Festy L daily driver wants to be modded, OK
    It is being modded , a little at a time http://www.cardomain.com/ride/2214953


    Join me on Facebook !! ;http://www.facebook.com/profile.php?...00000295094896

    Comment

    • #3
      the wires for the tach are already in the dash on all the cars, regardless of whether or not it had a tach in it from the factory
      No festiva for me ATM...

      Comment

      • #4
        Wow these keep being good to have around.
        As posted about 20 posts down.

        404 Not Found
        http://www.fordfestiva.com/forum/viewtopic.php?t=9118


        Orange faced




        White faced

        It's a good thing you don't read the stickies, you might of learned something.Poverty produces creativity

        Comment

        • #5
          I just noticed the twist of the rigthside peg is differenet on the orange face.
          It's a good thing you don't read the stickies, you might of learned something.Poverty produces creativity

          Comment

          • #6
            That really wasnt my question. Well, kinda.. they obviously do use the same connectors. Now, does anyone know which pin is for the tach?

            Comment

            • #7
              well, I could tell ya to do what I had to do and trace the circuits from muscle_Car1's pics, but I won't put you through all that trouble since I already have the diagram sitting in front of me.

              All this is taken from the white tach cluster cause thats the board I used for reference, but theoretically it would be the same for both.
              All pin numbers are labeled counter-clockwise from the blank spot (no pin) on the plugs, with the first actual pin being #1

              Black plug:
              Pin #1 = middle connection on white face tach = ground
              Pin #4 = bottom connection on white face tach

              White plug:
              Pin #2 = top connection on white face tach

              Hope that helps... if not I will post the whole diagram if I can ever get it scanned in
              No festiva for me ATM...

              Comment

              • #8
                if you could scan them, it would really help me out. I think I see what you are saying.. it would be better to make sure tho
                Thanks a bunch
                RJV

                Comment

                Previous template Next
                Working...
                X