Australian Wrecker / JunkYard Thread

[freshtiva]

I just noticed the hand control for the driver side mirror in this picture.

[Festiva GTX]

I just noticed the hand control for the driver side mirror in this picture.

I have seen it similar with 323 Mazda in here USA but I rather to have power mirror :wink:

[Sp33dY]

You could sell the cargo hardware too, real light and would cost much to ship.

Care to elaborate on what all these bits are for ???

Are they to 'hold in' the parcel shelf. ? I actually looked for the clips on the left side as mine are broken in my car, and it's not all tight and snug with the hatch closed. The ones in this car were all snapped too.

[freshtiva]

Yes that all the hardware needed for the rear hatch cover that conceals your stuff from view.

[David88]

Great. Thanks for hunting for us. Good parts hunting weather for you. Good stay inside and buy parts online weather for us. I need a grille and headlights.

You could buy this and break it. LOTS of goodies. It would live on in many cars over here. :wink:

http://tinyurl.com/2nep6f

[Safety Guy]

That steering wheel looks a lot like an early RX7 version. Could be the same.

One option: instead of shipping the whole tach cluster, consider sending just some of the internals which may be good to those who mod the clusters.

Dash tray may be faded, but worth redoing and installing for those who take their dashes out. Or using to make copies?

Same with dash clock bezel. May be faded, but worth using some dye on to "freshen it up." It should still fit better than ones from 323, Tracer, etc. The one I grabbed from an early Tracer would take some work to fit into a Festiva.

Karl

[Safety Guy]

Oh, and notice the antenna! Right hand aerial!!

Ship that assembly over to whoever wants "dual antennae!"

Total custom look--yeah!

Karl

[Sp33dY]

Steering wheel is not an RX7 wheel ..... stock wheel in the SHADES & FUNTOP's i believe.

[monkeyracing]

Cool! We have a volunteer! "Mazda 121" badge. That's what I'm after and have been for months.

[Sp33dY]

Dont worry ... i'll be looking for badges too

[stefan]

Oh, and notice the antenna! Right hand aerial!!

Ship that assembly over to whoever wants "dual antennae!"

Total custom look--yeah!

Karl

i'd do it :twisted:

[MazKid]

Steering wheel is not an RX7 wheel ..... stock wheel in the SHADES & FUNTOP's i believe.

Looks to be the same as a '82-'85 RX-7 wheel anyway. Atleast they are newer!

Since I don't have a Festiva yet(arg!!) I'd like to know if you can get me a front and rear bumper from a '86-'89 323 hatchback? I think there are atleast 2 styles, 1 is the same as mine, the other(s) cover more of the front like where the red is on mine below the main bumper. Like this:

Or this(the grill too, doubt you'd see one though):


I could use a few parts for my Protege aswell, I need a right-hand side bumper grill for the 323 GT-X bumper(as seen in my signature). I could use a '92-'94 323 sedan rear panel, the part on the trunklid. And I'd like a '90-92 323 sedan rear bumper if possible.

Let me know if any of it is possible. Thanks!
-Ryan

[monkeyracing]

The bumper grille is a tough one. The 323 gtx was pretty damned rare up here. As for the trunk panel, do you have a picture of what you want? I think I know what you're talking about, but it'd be best to be sure.

[Sp33dY]

323's of that shape are very very rare...... even harder to find than 121 bits. Might be worth joining and posting on http://www.fordlaser.com/ , they might be able to help you.

[monkeyracing]

If you're talking about the 323 sedan, they're not so rare here, but they were just call "Protege." Tons at the wreckers.