Bp swap road race festiva build.

[chiquito1228]

New cams, solid lifters and new header done

[chiquito1228]

[chiquito1228]

[william]

Glad to see you still posting on here, keep up the good work!

[chiquito1228]

Glad to see you still posting on here, keep up the good work!

Thank you

Finally intake flange, time to measure and weld PXL_20231026_004438955~2.jpg

[chiquito1228]

Old flange cut off and intake runners machine flat. Hopefully would have it weld by this weekend PXL_20231101_020510073.jpg

[chiquito1228]

Old flange cut off and intake runners machine flat. Hopefully would have it weld by this weekend PXL_20231101_020510073.jpg

[chiquito1228]

A lot has happened over the last few months. Short block has been put together with eagle rods, supertech pistons , acl bearing and boundary oil pump. Head has toda 272 cams with under bucket solid lifters. Intake manifold had flanged welded and machine flat. Also upgraded to nb miata tps,iac and throttle body to skunk 64mm. New 3" intake. Mild wire tuck along with a lot of wiring clean up.

[chiquito1228]

Pics

[chiquito1228]

https://photos.app.goo.gl/eRvxvPqvmK777h469 quick video of getting street tune

[chiquito1228]

PXL_20240628_170453282~2.jpg another day at work

[chiquito1228]

Screenshot_20240629-193441.png 53824718170_69a04932c7.jpg
Another successful event pretty happy how the setup perform. Time to relearn the car

[chiquito1228]

Another on the books. Was able to knock 2 seconds of my pb. With still a lot of room for improvements.

[chiquito1228]

53885705702_f9fc93e6c4_o_082733~2.jpg Pic

[EscortSportage]

Selling my foxbody track car, going to track prep my 93 Festiva. Already ordered an oil cooler, would a honda civic radiator work? I found an all aluminum civic radiator on ebay cheap, Im thinking i can get it to fit and find some rubber hoses to make it work. What did you do for a radiator?