Announcement

Collapse
No announcement yet.

Festiva Madness

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Some specific diff's that I know about...

    The instrument cluster plastic surround (bezel) from the 88-89 is incompatible with the later models. The clearance area for the steering column is shaped differently. Don't ask how I know this.

    And the lower dash area just to the left of the console area on the 88-89's doesn't have the fixed metal brace that the later models have.

    Seems that the speedo cable for the auto trans (ATX) models is shorter than those for the manual trans (MTX). The cables also appear to be a tad different as far as the end (the screw-on barrel at the transmission end of the cable.

    If you change from a non-tach cluster to a tach cluster, you WILL have to re-route the speedo cable out of the center brace of the dash panel and to the right of the brace. Else it will be way too short to connect into the new instrument cluster.

    Sam

    Originally posted by MONSOON View Post
    ^^ Everything from 88-93 will work^^

    With a couple exceptions from 88-89 carbed models.

    Focustiva: Because I was told it was was impossible to fit a Focus bumper on a Festiva.
    In memory of Dean Allen - V8 Festiva 1955-2010

    Comment


    • #17
      Seats from 89-89 are different than later years. Mainly due to the auto Vs manual belts. They arent a direct swap.

      see link
      Post your Festiva or Aspire repair and maintenance issues. - USE THIS FORUM FOR ANY TECHNICAL RELATED POST (IE. How do I change my oil?, How to remove axle from tranny?, etc)
      Last edited by freshtiva; 05-05-2008, 08:36 PM.
      sigpic
      The Don - Midwest Festiva Inc., Missouri Chapter

      Link to my festiva pictures below
      https://fordfestiva.com/forums/album.php?albumid=10
      Celebrating 25 years of festiva(s) ownership.

      Comment


      • #18
        Originally posted by sam.1956 View Post
        The instrument cluster plastic surround (bezel) from the 88-89 is incompatible with the later models. The clearance area for the steering column is shaped differently. Don't ask how I know this.
        i've known about that difference for about 5-6 years now and since i don't drive the car anymore i'll say how i know :lol: i wrecked the 89 we had and the parts car (90 LX) became the new daily driver with swapped VIN, but according to the paper work the 89 got a "paint job" with a different colour, it was a quick and temporary fix that worked

        1988 323 Station Wagon - KLG4 swapped
        1988 323 GT - B6T Powered
        2008 Ford Escape - Rollover Survivor

        1990 Festiva - First Ever Completed KLZE swap (SOLD)

        If no one from the future stops you from doing it, how bad of a decision can it really be?

        Comment


        • #19
          Nice Car Sam.....Somehow I found my way to this thread lol....But I am glad I did...nice car man...love the carpet :-)

          Comment


          • #20
            Sam, tell me about that Grant steering wheel. I was actually looking at buying one very similar. I had one on one of my mustangs and absolutely loved it. Any mods to make that wheel work?
            '93 Festiva GL / "HOT ROD"
            '02 F-150 Supercrew
            '02 Excursion 4x4
            '98 Jeep Cherokee Classic Limited

            Comment

            Working...
            X