Announcement

Collapse
No announcement yet.

zippys new look....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    ya... that ot-to-do-it today i was knid of sad cause i was called in to the place where i work (to talk about my work hours...) turned out they just wanted to lay me off so i went to a local tire shop where my friend works today and went rim shoping and i found a CRAZY nice set of rims for a GOOD price... so zippy MAY get a new set of shoes soon and i was talking to the owner of the shop and i may get a job there...


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

    Comment


    • #17
      That would be great if the job works out for you. Then you could get the employee discount on the new rims.

      Comment


      • #18
        I dunno I think with you rocking the socks and sandals like that the only reasonable thing to do is to run a 10 light light-bar...


        Ok, well now you've gotten ------g silly. ~ MONSOON

        Comment


        • #19
          ill stack them... 12 lights and ya the discount will be sweet i dont know when it kicks in tho....


          Mike, AKA the sasquatch
          1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

          Comment


          • #20
            Originally posted by knux511 View Post
            Socks and SANDALS!!!!!

            lol jk
            At least they're not black socks
            Ian
            Calgary AB, Canada
            93 L B6T: June 2016 FOTM
            59 Austin Healey "Bugeye" Sprite

            "It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)

            Link to the "Road Trip Starting Points" page of my Econobox Café blog

            Comment


            • #21
              Originally posted by fastivaca View Post
              At least they're not black socks
              i have black socks on now lol... just no sandals 8)


              Mike, AKA the sasquatch
              1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

              Comment


              • #22
                Wow....a wee bit of drag there eh? haha

                Comment


                • #23
                  Originally posted by thered56 View Post
                  Wow....a wee bit of drag there eh? haha
                  ya its kind of funny... i think i could have gone a bit faster at the drags too lol


                  Mike, AKA the sasquatch
                  1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                  Comment


                  • #24
                    zippy's newer look...

                    my friend with the mr2 wanted the stock rims back so... i got some 16"s now 8)







                    the only part that sucks is i need wheel spacers for the rear... im gonna get some tomorow


                    and when i get my new rims for it im gonna have these ones on the 323 gt... they look so cool....


                    Mike, AKA the sasquatch
                    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                    Comment


                    • #25
                      I would put the 323 Gt wheels on the Festy!

                      Comment


                      • #26
                        Originally posted by Biglay5150 View Post
                        I would put the 323 Gt wheels on the Festy!
                        ya i thought about that but i think they are even taller than the ones i had on there and im tired of switching wheels lol... maby ill try tomorow, maby then i wont have to buy wheel spacers...


                        Mike, AKA the sasquatch
                        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                        Comment


                        • #27
                          Very nice mike!!

                          I knew those lights were holding Zippy back!

                          Get some HID fogs in the bumper!

                          Comment


                          • #28
                            Originally posted by Amos View Post
                            Very nice mike!!

                            I knew those lights were holding Zippy back!

                            Get some HID fogs in the bumper!
                            thanks im gonna try to get some better ones down on my bumper but im gonna wait till i get a body kit on it so the lights and bumper looks good together... but i dont even know if there will be room with that big FMIC im getting :mrgreen:


                            Mike, AKA the sasquatch
                            1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                            Comment


                            • #29
                              i got some wheel spacers today but it makes the lug to short and it still hits but im gonna get some coilovers soon, im just waiting for a e-mail back to see if they are good for my car.... i think it looks awesome with 16"s

                              this is just with 2 nuts holding it on and the wheel cant move cause its pressed up to the shock/strut...




                              Mike, AKA the sasquatch
                              1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                              Comment


                              • #30
                                hey does anyone know if this is a rare motor? i have never seen a VC on a bp like this before...



                                Mike, AKA the sasquatch
                                1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                                Comment

                                Working...
                                X