imo the best suspension...fastiva style

[fastivaB6TG25MR]

im still working on it...

[pumbaplus]

just make sure you resize the pic on your pc, it should then upload no worries.

EG

[fastivaB6TG25MR]

i put some 97 integra gsr front springs in the rear and got a lot of drivability witout losing performance... pics soon

[fastivaB6TG25MR]

im not the best photographer... the rear shocks have a 3.5" extension on the top of them and i had to cut most of the stock spring pertch off the fronts...

[Nerd Racing]

has anyone else verified this guy's information? I am seriously considering purchasing the strut setup for my Aspire with celica coilovers.

[pumbaplus]

i wonder what would happen if the front spring perch stayed on the struts? would the tire rub?

[pumbaplus]

i'm willing to try it if the front spring perch could be retained....

I will seek an alternative to the rears as 3-4 inch drop is a bit much for me... i've got some mitsu gsr galant rears i may try...

[canadianfestiva]

What are the ksports off of? Do they make a kit for festivas? or is it for a different car that fits?

[Nerd Racing]

It rubbed on my strut tower on the inside so you would need to at least trim it. also its designed for a much larger diameter spring.

I have the front struts in, but not the rears yet. still have to get those. it wasn't as stiff as i had hoped with stock camry struts, but miles better than my stock struts.

[pumbaplus]

hi nerd, are you using the v6 ones or the 4cyl?

maybe it'll stiffen up once the rears are in,
those camry ones must be better than the 323 ons though..

[fastivaB6TG25MR]

a little update... i swapped the rear apc springs out for stock 3rd gen integra gsr rear springs... a little softer and more comfortable but plenty of perfromance still.

[hofficergrover]

did you have to cut the rear perches as well? looks like you did in your pics. really thinking of doing this could you get pics of what you did to the top of the strut tower?

[fastivaB6TG25MR]

i didnt have to cut the rears. they barely clear the tire. ill post pics next time i take the rear wheels off... its pretty much a piece of 5/8" rod that has been drilled and tapped at both ends... the shock screws into one end and the other is bolted through the rubber mounts and upper strut tower

[gorgonheimer]

need lots of pictures

[hofficergrover]

I'm sorry but what you said makes no sense to me at all. This is why i asked to see some pictures.