"Udder Horror" B6T Build Thread

[xaero_81]

And you wanted to race...you're almost done...lol

[Grey Vw]

It started!!! Here's the video. I didn't render it so the quality is a low.

http://www.youtube.com/watch?v=5CYvsb_ai-Y

[fastivaB6TG25MR]

nicely done sir... now hook up your intake and enjoy the fruits of your labor...

[timmay89]

Congratulations! Looks great!

[DrMaxwellEdison]

Sounds great Martin, commented and like the video

[lanemeyer14]

Wow man, jealous! My b8 swap project has been sitting for over a year now waiting to be finished

[Grey Vw]

Congratulations! Looks great!

Thanks

Sounds great Martin, commented and like the video

Thanks, I'm going to make more when it's driveable.

Wow man, jealous! My b8 swap project has been sitting for over a year now waiting to be finished

If a 16 year old can do a b6t swap then you surely can do the b8. Good luck

[DrMaxwellEdison]

I'm saving up for either the same setup or a BPT swap... depends on availability and cash-flow when I get ready for it... Considering I have plans to move to Baltimore in June (or there abouts) I'm not going to be doing it till after I'm settled and have a square budget for things (like rent and insurance and stuff)

[lanemeyer14]

If a 16 year old can do a b6t swap then you surely can do the b8. Good luck

I'm sure I could get it done, but the car has been sitting at a friend's house about an hour away ever since it broke down. Haven't had any time to get over there due to my work schedule and his schedule with opening up a motorcycle shop. I'll get it done soon hopefully.....I'm ready to get rid of the civic I've been driving!

[Flyin4stroke]

I made a mount similar to the engine mount on the cam gear side and it bent the crap out of it. Your probably going to have to brace it better but weld it up and try it see if you have the same problem I had. Looks like u need to make a write up on this thing since you did it in only a few weeks. Looks good. Now time for the track

[Grey Vw]

I sort of wished I had gone with a Bp because of all the wiring but It's not as hard as everyone makes it out to be.

I made a mount similar to the engine mount on the cam gear side and it bent the crap out of it. Your probably going to have to brace it better but weld it up and try it see if you have the same problem I had. Looks like u need to make a write up on this thing since you did it in only a few weeks. Looks good. Now time for the track

I was thinking it was a little thin for that, bracing is easy though. Week long breaks from school really helps getting stuff done. I wish I had been writing everything I did but I didn't know what I was doing or if I was doing it right half the time, doing a writeup now would be pretty hard since I already have everything in, I definitely will try to do a write up since It would have helped tremendously. The track doesn't open till late February or early March

[MEXTIVA]

Congrats....Sacramento is open!!!

[Grey Vw]

Yah, Maybe I'll go when it's running but it's almost an hour and a half away.

I made another video, It actually stays on now. Just have to hook up the radiator now,it bearly sorta fits.
http://www.youtube.com/watch?v=5CAvRNQnGQk

[KB Motors]

good work on the swap man you had that done in a jiff. not to smart to rev your car with no radiator hooked up. Keep up the good work

[festyfreak39]

great job buddy!!!! glad a 16 y/o smarter then me got it done!!!!!!!!!!!


great great great sucess GL with it being reliable