Tweet
Okay so I know I'm starting this a little late lol but better late then never I guess. Started out with a 1992 blue ford festiva. I like to be different so, I choped it up and made a mini truck out of it. Its been alot of work and seems like its never going to end but I'm getting closer. I dont have the before pics but I'm sure you all know what a festiva looks like. were going to skip all the technical stuff how it was cut etc etc. ... as it sits right now the interior has been gutted completle dynamat has been installed, the doors have been converted to gull wing, its been lowered and 15inch rims... the full run down.
aspire swapped, all new bearings, seals, rotors, drums, pads, shoes, calipers, wheel cyl's., brake lines. The front brakes are aspire auto rotors with egt calipers, aspire brake booster, and protege master cyl. The suspension is aspire kyb's with the perches cut off and sleeve spacers welded on, coilovers, with 150r spring rate and 250f I believe lowered 1.5 inch. All new strut mounts, Tie rods Inner and Outer aspire brand new, with brand new aspire LCA's, the rims are 15x 4x100 by +40 offset. Running with fierce 195/55/15 tires. FMS euro complete body kit, custom cut sun roof, fenders rolled. "bed" is herc lined with subaru bratt seats welded in. All the door handles are shaved with door pop's installed. battery has been relocated into the passenger rear fender. As of today Ive got about 14 days untill I ship out to fort sill for AIT for 6 weeks so everyday I work on it and get a little done. My goal is to get all the body ready for paint before I leave. Today I am working on the firewall and the heater box.
aspire swapped, all new bearings, seals, rotors, drums, pads, shoes, calipers, wheel cyl's., brake lines. The front brakes are aspire auto rotors with egt calipers, aspire brake booster, and protege master cyl. The suspension is aspire kyb's with the perches cut off and sleeve spacers welded on, coilovers, with 150r spring rate and 250f I believe lowered 1.5 inch. All new strut mounts, Tie rods Inner and Outer aspire brand new, with brand new aspire LCA's, the rims are 15x 4x100 by +40 offset. Running with fierce 195/55/15 tires. FMS euro complete body kit, custom cut sun roof, fenders rolled. "bed" is herc lined with subaru bratt seats welded in. All the door handles are shaved with door pop's installed. battery has been relocated into the passenger rear fender. As of today Ive got about 14 days untill I ship out to fort sill for AIT for 6 weeks so everyday I work on it and get a little done. My goal is to get all the body ready for paint before I leave. Today I am working on the firewall and the heater box.
Comment