Daniel's TruckStiva Build Thread (56k warning)

[zoom zoom]

^keyloggar

[daniel_cogar]

[Nerd Racing]

can you post up some rack to trans pics?

[daniel_cogar]

can you post up some rack to trans pics?

[daniel_cogar]

sorry about the last two i had to lay down and slide under it to get them . there fuzzy

[Nerd Racing]

no problem I know what they look like.

I had to scoot my trans to the passenger side some to gain the rack clearance I needed. I think its time to request my dad's cherry picker to move things where they need to be.

I also will have to move the brake and fuel lines out of the way and possibly "massage" the body at that point to get the transfer case to tuck up in nicely.

Looks like you're moving along nicely man!

[daniel_cogar]

slowly getting some done little by little..... this really is the point in which i just wanna throw it back together lol

[Nerd Racing]

same here man. I'm selling my 4wd protege and getting a Mazda 2. I hate having to work on two vehicles, one just so I can get to work the next day.

[zoom zoom]

X3, I've given up on the 626, my fiance is going to putt around town till it blows, and I've been neglecting the minivan..had to do some stuff to it the other day and still have another part to put on it.

[FastOrBust]

good progress and i need to get rid of the dsm, i need a better dd

[daniel_cogar]

didnt i read somewhere that a kia sophia head is better flowing or something? im going to start head work soon and need to figure out if im going to do work to the bpt head or switch the cams to a kia sophia head...i tryed to search but came up with nothing.

[Hot_Wheels]

Kia intake is better, bp05 egt/protege head is better then bp26 head. Bp4w is best head but will need a custom intake mani

[daniel_cogar]

so Ive ran into a brick wall ..... I have a hydro g series transmission swap in the building I was going to use the axles from but there way to big .. im stumped

[zoom zoom]

The front axels? Is it the differential is wider in that awd tranny?

[daniel_cogar]

The front axels? Is it the differential is wider in that awd tranny?

yeah it measures about 1 foot wide from seal to seal on the front awd transmission as to the g series which is about 8-9 inches wide ...also the input shaft on the awd is about .96 in diam as to the g series which is about 1.05 in diam