Ian's B6T Festiva build

[mikemounlio]

Did you do the core support mod?

[fastivaca]

Looking more like a car again! Exhaust will be finished this afternoon!

[azgtx]

Not to my knowledge it has a spring in there

[fastivaca]

Quick question... does the air bypass valve have to mounted horizontally?

[fastivaca]

If I was running that fine of a nozzle, I would spray pre turbo. That will help out your temps alot if your turbo is a touch undersized, or no intercooler.

Sent from my SM-G900V using Tapatalk

I'm going to follow Charlie's lead and have just after the turbo but spraying towards it. He has a photo of the little manifold he fabbed up in the Tweak's rebuild thread.

[bhearts]

If I was running that fine of a nozzle, I would spray pre turbo. That will help out your temps alot if your turbo is a touch undersized, or no intercooler.

Sent from my SM-G900V using Tapatalk

[fastivaca]

What size nozzle are you looking at

Sent from my SM-G900V using Tapatalk

I'll be running smallest nozzle I could get from AEM. Not sure on the specs.

[bhearts]

What size nozzle are you looking at

Sent from my SM-G900V using Tapatalk

[fastivaca]

I've been plugging away on the project and can see the end!

Some little updates. My solutions may not be as elegant as Charlie's but they should work....

Pipe run directly from compressor to intake, no intercooler, water/meth injection to come...


Aspire thermostat housing...


Slim fan installed...


Exhaust is almost together as well.

[fastivaca]

Hey Ian, I don't know how much use you have for 13" winters but apparently the Leduc Cambodian Tyrant has 155/80 iPikes on for $10 apiece (if there's any left anyway).

Thanks Tom. I'm good on winters. Recently grabbed a set of four studded I-Pikes on rims for $60!

[Tommychu]

Hey Ian, I don't know how much use you have for 13" winters but apparently the Leduc Cambodian Tyrant has 155/80 iPikes on for $10 apiece (if there's any left anyway).

[fastivaca]

Finished VAF meter bracket. There's also a little brace that goes from the outlet side of the VAF to the battery hold down.


With the coil and VAF mounted...

[fastivaca]

Love the intake support bracket, Ian

Thanks Jed!

[fastivaca]

I think I would look into moving the battery though.

Just wondering what your thoughts are in this.

[bhazard]

I think I would look into moving the battery though.