Ian's B6T Festiva build

[Damkid]

Nice start to the build Ian!!

[kumalaba]

wicked!

[fastivaca]

An update.... sort of

Been sorting through all the bits and pieces that came with the car. Some of you have kindly purchased some of those, thank you! I traded the humungous 27"x12"x3" front mount intercooler for a more manageable 21"x7"x2½" one which new in the box.

Here's some of the work we'll be doing on the project car:

- Remove the interior for cleaning and installation of sound deadener
- Install pedals for the standard transmission
- Remove front and rear bumpers
- Make necessary repairs to the body work
- Do some fibreglass work to bring the FMS front bumper back close to original
- Remove the current B6 (a later model) and automatic transmission
- Figure out all the mounting etc. for the new engine and transmission. There are custom mounts already for the passenger side and rear transmission. I need to ensure that they will work together and then fabricate the front mount.
- I'll do all the wiring while the interior is out.
- Complete Aspire brake swap (car already has the Aspire master cylinder/booster). I'll use the calipers and rotors from my current car as they are the larger ones from an automatic.
- Remount the battery up front, thinking of using an MX-5/Miata or Honda Civic battery.

I plan to transfer the "goodies" over from my current car so I'm not sure exactly what will happen to it afterwards. Here's some on them...

- Factory A/C
- The Toyota MR2 seats (will probably recover them at some time when budget allows)
- Short shifter
- Tein coilovers and other suspension bits
- Wheels and tires
- Sound system
- Hood strut
- Steering wheel (the one in the car now is a cheap e-bay Momo knock-off, way too much flex in it for my liking)
- Mazda 121 grille and headlights

Clean up has already started on the car. The Acura seats that were in it are now in my daughter's car and her old LX seats are in the project.

My son is going to be the official project photographer. I'll post a few up a bit later as they are all quite large at the moment.

Overall idea is to get this car done by the end of May 2014. Progress may be in fits and starts as time, funds and other responsibilities allow.

Here's a photoshopped picture that DJ sent me a loooonnnnggg time ago (I think Travis actually did the work) that is a bit of inspiration for the project....

[dcoultis]

Congrats on your new project Ian, that will be one sweet ride when your done with it! Whats the plan for your current Festiva after you swap all the parts off it?

[Advancedynamix]

The kids are getting a little big for a single cam N/A B6. I should get you a 5 door shell from Mexico, I saw a red one the last time I was there. That'll give them 5" extra leg room and their own doors.
Looking forward to the build!

[leapin]

Oh man am I jealous! Is this going to replace your current Festiva? Also what seats are in this new car?

Now my car will be really slow compared to yours!

Look forward to this build!

[kumalaba]

should be awesome!

[M3NTAL]

another festiva build woohoo!!


Congrats Ian, that looks like a promising family projectccasion5::headbang::thumbright::blob5::happy2:ccasion9::nike::wav:

[fastivaca]

I've just completed the purchase of a complete B6T and transmission, FMS/ATH body kit, complete Aspire swap, and a 93 B6 swapped Festiva from forum member jr.fester.

My family and I making a project of this which we'll document here and on our econoboxcafe blog.

Here's a quick overview of what we have in mind:

- strip the 'new' car down and make any rust repairs etc
- install body kit
- paint... probably red but who knows
- Aspire swap
- switch over all the goodies from my current car including Teins, seats steering wheel etc.

Planned completion: Westiva 2014.

The subject:


The new heart:


Turbo side: