-
Last edited by bravekozak; 10-05-2013, 06:41 PM. -
-
i just saw the "festiva" badge, i thought i would post on here but you beat me to it! let me know if you come across a 3 piece egt parking brake cable cheap. I want to convert disc on the festiva but need a ebake cable.
Comment
-
I'm not sure about the part number on this one. I think the proper part number should be KD00228460C.Last edited by bravekozak; 10-16-2013, 12:52 PM.Comment
-
-
Yeah, $10 at most in the JY.Originally posted by bravekozak View Post90 Festy (Larry)--B6M (Matt D. modified B6 head), header, 5-speed, Capri XR2 front brakes, many other little mods
09 Kia Rondo--a Festy on steroids!
You can avoid reality, but you can't avoid the consequences of avoiding reality--Ayn Rand
Disaster preparedness
Tragedy and Hope.....Infowars.com.....The Drudge Report.....Founding Fathers.info
Think for yourself.....question all authority.....re-evaluate everything you think you know. Red-pill yourself!
Comment
-
-
1991 Ford Festiva BP (Full Aspire/Rio Swap) (337k Miles) (Around 95k Engine)
2002 Chevy Cavalier LS Sport 2.2L DOHC Ecotec (Threw a Rod)
1998 Chevy Monte Carlo LS 3.1 V6 (225k miles) Best MPG = 28Comment
-
I tried about 5 times to get this guy to sell me just the Razo insert, to put in my Pride cubby behind my shifter (since I don't have a shift pattern on my knob anymore), but he won't budge. I will not spend that kind of money. Does anyone know where I can buy just the insert?Last edited by bravekozak; 11-27-2013, 10:40 AM.Comment
-
-
-
that's the correct part. too bad these don't come with the terminal parking bracket that was screwed to the back of the ones that came in a car with radio delete. this was a plate to park the unused terminal end of the radio wiring harness. keeps things tidy back there.Originally posted by TorqueEffect View Post
Comment
-
Actually, It's more to prevent rattling while moving down the road. Manufacturers use a lot of wire looms and foam to wrap loose connectors. There are even connectors with barbs. This bracket provides a positive anchor for a future install. All the wires are cut by a machine to make a wiring harness. That's why they won't have a separate wiring harness without radio wiring.
Notice it has a dock for the unused connector on the back of the radio. It becomes live when you turn the radio on. I still haven't figured out what it was for. Power antenna relay?
F3, do you know where I can buy some routing tape? Those pads that stick the wiring down under the carpet.Last edited by bravekozak; 12-20-2013, 09:31 AM.Comment
Tweet
Comment