Interchangeable parts tab for the Customized Modifications section

[wrongfulleaf]

Honda vx wheels will only fit if you have the aspire swap...they're 4x100

Excellent! I will mark that off of my list then. I plan on going to the JY this weekend AGAIN and I need a center console and possibly some rims if I run across some.

[wrongfulleaf]

There are a few more people on now, anybody got any other stock rims that will work?

[takeone51]

i got some off an 88 mercury tracer on ebay for my fotm but they were konigs..

[freshtiva]

Older corolla wheels work, Ive got a couple of sets of 13s.

[lanemeyer14]

There are a few more people on now, anybody got any other stock rims that will work?

Take a ruler with you and measure the bolt pattern of any wheels you see that you like....might get lucky!

[Zanzer]

There are a few more people on now, anybody got any other stock rims that will work?

Geo Metro rims will work. That's what I have on my car.

[freshtiva]

Take a ruler with you and measure the bolt pattern of any wheels you see that you like....might get lucky!

Or make a cardboard template of the holes and center bore from your festiva wheels and takes it to the junk yard.

[lanemeyer14]

Or make a cardboard template of the holes and center bore from your festiva wheels and takes it to the junk yard.

That's an even better idea!

[lanemeyer14]

Something else to add to the list...
Ebrake handle with attached boot from a Land Rover fits right onto the festy ebrake. Perfect color match, and way cooler looking than the festy handle. Not the best pics, but here they are anyway...

[Sandm849]

Can we just get the final organized list stickied?

[Sandm849]

With making sure all of the info is correct? And if has anything to add just pm the moderator? Just so it stays organized.

[bobbyspider]

i like the idea of having a sticky

[Tim]

Shifter bushings from an Aspire.

Usually in good shape, are the exact same as the Festiva's, and are free.

[freshtiva]

^ good one !

[Tim]

Power steering from an Aspire. The rack is a direct bolt on to the Festiva. And the pulleys should match up with mid-92+ cranks.

The A/C compressor is shared by a variety of different cars, one of which is the early 90s Toyota Tercel. The clutch and fittings may need to be swapped out.

Most shift knobs from 80s and 90s Japanese cars fit the Festiva. I've used knobs from a Subaru, a Civic, and a Tercel wagon on past Festivas.

Escort tie rod ends can be subbed for Aspire tie rod ends (much cheaper).

The driver's side wiper was originally 2" longer than the passenger side. The extra inches make a big difference when it's raining.

VW Rabbit seats will bolt directly in (unconfirmed but others have claimed this works).

All Mazda steering wheels from around the Festiva's vintage will work.

The '89 Festiva EFI and early Tracer/323 share the same MAF box.

Many small relays and solenoids are shared by the Festiva and Mazda cars of the same vintage.

The 323's alternator is more powerful and a direct bolt-on for EFI Festivas.