digital 323 instrument cluster

[kellen302]

All we need is a pinout diagram from the digital cluster, anybody got an EVTM for an 86-87 323 with the digital cluster? or a shop manual, I'll look at the school shop

[kellen302]

FOUND a shop manual online, http://www.scribd.com/doc/56817909/C...orkshop-Manual page 921 has the pinout for the cluster I think

[IdealSociety]

See, now you guys are thinking

Dont ask if it can be done, find a way how

And then document and expand the knowledge of the community!

[DriverOne]

My cluster arrived damaged. I'll post pics later.

[Damkid]

Since I already have a cluster from a 323, the digital cluster is plug and play with my festiva

[IdealSociety]

Since I already have a cluster from a 323, the digital cluster is plug and play with my festiva

one of these days you should write down the wiring/colors on the pin locations.

I have the pinouts for the stock festiva somewhere i can post, as well as the ones from my rx7 cluster (which obviously does no good here).

[Damkid]

Well what Fred did when he installed the cluster, he pulled the festiva wires from Festiva connectors and re-installed them in the 323 connectors so it looks OEM

[kellen302]

^ Does that mean that all the wires are there and have the correct signals? if so, I need to find a digital cluster of awesomness

[Damkid]

Basically yes it works like factory, I think the only difference is the low fuel light doesn't come on when I'm low on gas, but it does light up when starting the car

[kellen302]

Any pics you have of the wiring on the plugs would be of great help
thanks heaps oh great KL God

[Damkid]

Any pics you have of the wiring on the plugs would be of great help
thanks heaps oh great KL God

:lol: i can grab a pic but i don't think it'd help a whole lot, it wouldn't look much different then if you pulled a 323 cluster and looked at the 323 connectors, except on mine you can now see where i tapped into the wires for my temp gauge and tach from when i did the KL swap

[kellen302]

But do you have the festy wire colors going to the 323 connectors? thatwould be good to see

[Damkid]

Ya that part would be worth the pic but it'd be hard to get a good pic that shows every wire color but i can try, it may take me a bit to get to it though so if it takes too long and i forget, send me a PM to remind me lol

[kellen302]

no problem, this would give us a number of other guage options

[IdealSociety]

thats the same thing i did with my rx7 cluster i had. i pulled the pins and reinstalled them in the right order for the different cluster. when i got sick of the cluster always reading incorrectly i pulled them back out and reinstalled them into the festiva locations.

ill post up the festiva pinouts here in a minute. im sure i still have them from the last time i used em (4 years ago or so)

EDIT: i think this is it.