4GREEN GRAB BAG

[jawbraeka]

We had the live chat feature on the old board and no one was ever on it.

I mean we could have the feature, just because but I think there should be a poll on this one.

The 2nd photo is a feature I have.. I think that came stock on most models here (we get cold in winter too) ... The next time I'm at the wrecker, I'll see what they want for it and if I have the cash I can grab it if you like..

The 3rd picture I would think as long as you have the heater box attached, would fit as I don't think kmf would go too far out of their budget to differentiate between LHD and RHD for a simple heater pipe.

Also, it looks to be a case of the seat pipes would be able to be flipped to suit the vehicle if necessary.

sent from the depths of hell.

[F3BZ]

Upper & Lower LHD column covers for early 2 pc. cars. i don't know why the later cars use a 3 pc design. probably something to do with upgraded crash protection?
upper - MDA01 602 2109 $4.76 lower - MDA01 602 231A09 $10.29. bought summer 2013.

[jawbraeka]

What is the part number for the following part?



sent from the depths of hell.

[F3BZ]

if you have that black spidering starting around the edges of your rear veiw, here's the exact replacement. it is a day/nite. the lever doesn't show in the pic. KK130 69 220. $18.29. bought summer of '13'.

[bravekozak]

Gray dash caps.


Console bracket.

[F3BZ]

fuel filler pipe for the 3 door. part# is obvious in the pic. $18.29. still available end of 2013. has the flapper for unleaded nozzle. gasket for under the flange is no longer available.

[F3BZ]

this is the hatch weatherstrip. MDA0162761. $16.29. and this battery tray liner is pretty cheap at $2.62. i just bought it out of curiosity but i still don't get it. a plastic tray to line your plastic battery tray? both bought in oct. '13.

[bravekozak]

I always wondered what those large rectangular holes were for. Thanks. I was going to post that as being a rare option at one time. The missing tubes look like they hang off the shifter studs.

[F3BZ]

this was a big disappointment. 4G showed that they had the 3 pieces of ducting for rear seat heat outlets. unfortunately, after I paid and after the box was shipped they emailed me to say they were refunding me because the LH and RH ducts were no longer in stock. these are the 2 long arms that hug the floorpan hump and dump out through a hole in the carpet under the front seats as shown in this diagram.


this system is on my JDM car and this is what it looks like in real life.


here is the piece from 4G that attaches to the bottom of the heater housing. you could feasibly run some flex tubing off this and run it under the seats. i'm just not sure yet whether it can be attached to the US housing. might require cutting into the bottom of the housing to allow air to feed this splitter. KD001 61 271B. $2.95.

[AlaskaFestivaGuy]

F3BZ,

So is this 0.5mm-larger-diameter fewer-turns spring the answer to trailer hauling on stock Festivas?

[AlaskaFestivaGuy]

So where to we get drawings with part numbers. FourGreen's parts finder doesn't find much of what I want, and I don't read Russian.

I recently emailed FourGreen asking for PDFs and this was their response:

We are using web based Kia WPC by Kia motors so it is not easy to sending you all the PDF drawings.
If you give us the VIN numbers for the vehicles with part description, we can help you to find OEM part numbers.
Thanks,
Jane Kang
FourGreen Auto Parts
Office in Korea : +82-2-2212-9484
Fax in Korea : +82-2-2212-9584

[F3BZ]

pride YOUNG and BETA hatch decals but no pride MIDDLE AGE or pride OLD decals. YOUNG - KK302 51 721. BETA KK136 51 725. both $3.67.

[avitsefdrof]

Does anyone know what the Pride deco tape part numbers look like?
Search by part description "DECO".
They range in price from $4.72 to $28.00


Here are the part numbers for the upper and lower rad hoses.

I still have a few parts left from the shifter kits. I wonder if I missed anyone?
Shifter stabiliser bushings, shifter bushings, upper ball seal + some sway bar to control arm bushings.

BK, I'd like to purchase the shifter bushing/5speeds if you have any remaining. Thanks. Mark

[F3BZ]

all 5 pcs. of the windshield mouldings were available as of 10/2012. painted aluminum with bonded rubber. you'll need about 20 clips to do the whole surround. upper RH - MDA02 50 601 - $6.79 upper LH - MDA02 50 605 - $10.36 lower pc. - MDA02 50 604 - $13.57 side RH - MDA02 50 602 - $7.50 side LH - MDA02 50 603 - $7.50. clips - KKY01 50 609A - .45.

[bravekozak]

I look up the part numbers on the Russian website first.
Then I go to Four Green for the price.
The Phillipine website account is closed.