Announcement

Collapse
No announcement yet.

4GREEN GRAB BAG

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F3BZ
    replied
    i wonder why. the pride radio is in the same location and there's no additional cable shown in the parts diagram.

    Leave a comment:


  • bravekozak
    replied
    I installed that antenna. It's great. Nobody can walk up to your car, pull it out and bend it like a pretzel. Five seconds up to full extension, and five seconds down. I will post a video in the spring. It's a two stage antenna that's longer than the stock Festiva antenna. Please be aware that you will have to go to the junkyard and get an antenna cable extension to reach the back of the radio. They are quite common.
    Last edited by bravekozak; 12-23-2013, 05:35 AM.

    Leave a comment:


  • moz
    replied
    This is awesome. You guys are walking, talking encyclopedias when it comes to spare parts.

    Leave a comment:


  • Gomez
    replied
    I'm really liking this thread more and more.

    Leave a comment:


  • F3BZ
    replied
    i know, i know. totally unnecessary and another pound of weight but a power antenna on an ecnonobox? weird. cool thing is this ones infinitely height adjustable. dashboard switch is no longer available but there's alot of them FS on Ebay de. motor is KK152 66 950. 57.36. mast is KK152 66 930B. $22.86.


    Leave a comment:


  • PhoenixSHO
    replied
    Some other of my 4green stuff via this thread : http://www.fordfestiva.com/forums/sh...bers-inside%29

    Leave a comment:


  • PhoenixSHO
    replied
    Misc crap.



















    Leave a comment:


  • bravekozak
    replied
    engine mount bolts

    intake and exhaust manifold gaskets
    Last edited by bravekozak; 12-20-2013, 01:53 PM.

    Leave a comment:


  • F3BZ
    replied
    this goes with the above bracket. it's almost impossible to find a replacement filter with the bracket. even ford doesn't have a part # for it. you can get the motorcraft filter but it doesn't come with a bracket. a little expensive but most EFI filters are due to higher pressures involved. KB359 20 490A. $19.21. still in stock.


    Leave a comment:


  • F3BZ
    replied
    looks like a little alien. at only $2.38 you could put one in front of the headlights too like some of the old 121s.

    Leave a comment:


  • F3BZ
    replied
    this might be useful especially in the rust belt when you broke the studs or twisted off the rubber insulators trying to get the fuel filter bracket nuts off. this is the bracket that the fuel filt bracket mounts onto. this is the one for manual trans cars. the passageway is for the clutch cable to run through. KB378 13 440A. $11.05




    Leave a comment:


  • bravekozak
    replied
    I could have saved you $80.

    Here's a PLATE ASSY-LOCK for the fuel filler door.
    Last edited by bravekozak; 12-11-2013, 01:44 PM.

    Leave a comment:


  • F3BZ
    replied
    I'm putting a PS system together from scratch. all i had was the pump. got a rebuilt rack. here's the reservoir. a little pricey at $93 but its shiny and new. KDX18 32 690.

    Leave a comment:


  • bravekozak
    replied
    Rear wiper bushing.

    Leave a comment:


  • bravekozak
    replied
    Blower resistor.

    Leave a comment:

Working...
X