Announcement
Collapse
No announcement yet.
4GREEN GRAB BAG
Collapse
X
-
I so need help with the part numbers. Every time I try to look something up on 4 green I don't find what I need. OR I do and don't even know it.
-
-
look for the self lubricating metal bushings.. they apparently last a lifetime and take off the ever annoying job of getting under and redoing them.. about 35$ from memory..Originally posted by kumalaba View Posti need those green shifter bushings but i need to pay you for my last order first!!!!!!
Leave a comment:
-
i need those green shifter bushings but i need to pay you for my last order first!!!!!!
Leave a comment:
-
Does anyone know what the Pride deco tape part numbers look like?
Search by part description "DECO".
They range in price from $4.72 to $28.00
Here are the part numbers for the upper and lower rad hoses.
I still have a few parts left from the shifter kits. I wonder if I missed anyone?
Shifter stabiliser bushings, shifter bushings, upper ball seal + some sway bar to control arm bushings.Last edited by bravekozak; 10-18-2013, 06:20 PM.
Leave a comment:
-
I gotta post here cause I got a CRAP load of stuff and doodads from 4green.....
Leave a comment:
-
the spring on the right is the rear spring for the 94 5 door pride. the one on the left is a stock 3 door festiva spring. all dimensions are the same except that the wire diameter for the 5 door spring is 1/2 mm larger in diameter (10mm). when plugged into a simple online spring rate calculator the 5 door spring is almost 25% higher force for each inch of compression. (97 lbs./in. vs 121 lbs./in.). part# KK153 28 011. $25.45. still available as of 10/2013.
Leave a comment:
-
As an FYI Dodge Neon strut clevis to knuckle bolts and nuts work fine on a Festiva. I have 2 on mine now. Would be easier/cheaper than shipping from 4Green for such a small part if that's all you needed.
Cool thread.
Leave a comment:
-
Thank you. I just realized it has a clear bump not the amber ones I'm used to seeing.
Leave a comment:
-
This is the one you want. It's for a DA.
Four Green has a lot of part numbers with no pictures for these corner lamps.Last edited by bravekozak; 10-14-2013, 08:11 PM.
Leave a comment:
-
Thanks BK. I've been looking on the site but not having much luck finding anything like the corners I discussed with you.
Leave a comment:
-
Here is the link to Four Green parts finder for the power antenna that I purchased from them. It's great to have an antenna that nobody can just walk by, pull up and bend.
Here are my Avella dust shields after powder coating. You definitely need NOS parts in order to have a finish this good. Type in the part numbers to see how expensive these parts are:
MDX5033261 COVER-DUST,RH MDX5033271 COVER-DUST,LH Last edited by bravekozak; 10-14-2013, 07:33 PM.
Leave a comment:
-
Can you post a link to this "4 Green"? I don't know a thing about it but I'd like to
Leave a comment:


Leave a comment: