4GREEN GRAB BAG

[F3BZ]

Since my console was really in good shape, I ended up getting a boot from Greensales for $35 shipped
a boot retainer from ralph89891 for $10 shipped. Didn't save much over the entire assembly from FourGreen
but did reuse good parts which were already here.

probably better off. you can see what a crap job kia did on molding the boot on mine. sometimes the kia parts are noticeably inferior in finish than the made in japan ford parts.

[F3BZ]

cool. glad you contribute pics. the isolators are good to have. usually destroy the old ones in rust belts. wonder why you need isolators on the filter? vibration? it's already got in/out rubber tubing.

[1990new]

[IMG][/IMG]

Metal sleeves are needed for the rear insulators. They are not shown here.

[1990new]

Since my console was really in good shape, I ended up getting a boot from Greensales for $35 shipped
a boot retainer from ralph89891 for $10 shipped. Didn't save much over the entire assembly from FourGreen
but did reuse good parts which were already here.

[1990new]

I believe Kia does not have stock on that part.
That is out of stock
I bought mine used from Australia.

Thanks Brave.

you might just be able to order the whole console assembly. i had a new 4G one for sale. i'll dig for it if you want. not sure where it's stored.

Thanks F3BZ, The entire console shipped to me via Korea post would be $50.63, which isn't too bad.
I'll probably just order one and add a few other misc small parts at the same time.

[F3BZ]

Has anyone ordered on of the Pride shifter boots from FourGreen?

you might just be able to order the whole console assembly. i had a new 4G one for sale. i'll dig for it if you want. not sure where it's stored.

[F3BZ]

The visor flaps will come off and swap over pretty easily. I forget the position but I think it is about full extension and the flap will pull off and can be easily put on the US late model rods.

that's a great tip. i tried it. just kept pulling on the mounting arm as i rotated it. takes a pretty good tug. the mazda based gtx is a little easier and obvious with the set screw.

[bravekozak]

I believe Kia does not have stock on that part.
That Ford part is out of stock everywhere.
I bought mine used from Australia.

[1990new]

Has anyone ordered on of the Pride shifter boots from FourGreen?
http://www.fourgreen.com/store/scrip...p-KKY026433109
And does it come with the retainer piece? Or can it be ordered separately?
Now that I'm converting Rosie to a 5 speed I will need the boot to put in my automatic console.

Looks like it is sold separately and this is the part number:
http://www.fourgreen.com/store/scrip...E-p-KKY0264332

Diagram and parts list link:
http://doc1000.amcarparts.co.uk/prid...-number-42362/

[jawja jim]

good pick up jawja jim. i pulled a 93 visor and sure enough i see the extra bend that kicks the visor out more. seems there is always something to ad to the festiva trivia quiz. i think the US was the only market to get the cursed motor belts. glad i missed posting the part#s so now i will but with the mention that these are for PASSIVE BELTS only or belt convertions INCLUDING trim.

The visor flaps will come off and swap over pretty easily. I forget the position but I think it is about full extension and the flap will pull off and can be easily put on the US late model rods.

[drddan]

Oh yeah. I seem to have gotten me some new shoes and socks for the Sport!

[drddan]

i think the US was the only market to get the cursed motor belts.

I freakin dislike the auto belts! So much that ....

[drddan]

thanks 1990. wasn't about to dismantle a good rack to find out. another member will be glad to know they didn't waist money.

[F3BZ]

thanks 1990. wasn't about to dismantle a good rack to find out. another member will be glad to know they didn't waist money.

[F3BZ]

good pick up jawja jim. i pulled a 93 visor and sure enough i see the extra bend that kicks the visor out more. seems there is always something to ad to the festiva trivia quiz. i think the US was the only market to get the cursed motor belts. glad i missed posting the part#s so now i will but with the mention that these are for PASSIVE BELTS only or belt convertions INCLUDING trim.