4GREEN GRAB BAG

[F3BZ]

somebody bought this from 4G because there is a pic of it on their site. might be a solution if your's is beyond repair. KKY01 46 100C. about $65.

[bravekozak]

New rubber to cover the threads and nuts that support the wiper transmission.

$0.71 each.

[junspeed]

These parts are so awesome ...

[jawbraeka]

I'm surprised that this thread hasn't clicked over a few more pages by now.

sent from the depths of hell.

[avitsefdrof]

Brave....is there a center armrest out there somewhere for our Festy's? Thought I saw one somewheres????

[bravekozak]

No Pride/Festiva armrest. I have a Kamei armrest from Germany that I will be welding in as a customization. It can be flipped up when not in use.
"Schwarz" means "black" and "leder" means "leather" in German.
Get the one with the built-in bottle cooler. You will have to suppy power for the fan underneath the armrest.

There is only room for one armrest between the seats. You will have to share it with a passenger.

[PhoenixSHO]

ORDER DETAILS

1 x KKY0150621B - MLDG-ROOF, RH @ $15.62

1 x KKY0150626B - MLDG-ROOF, LH @ $15.62

2 x M85316937104 - REST-ARM @ $5.22

1 x MD00163932 - W/STRIP-RR WINDOW @ $33.52

1 x KK19166120D - SWITCH ASSY-MULTIFUNCTION @ $73.07

1 x MFB0158210 - HINGE ASSY-A, RH @ $13.33

1 x MB15658240 - HINGE ASSY-B, RH @ $9.52

1 x MB15659240 - HINGE ASSY-B, LH @ $9.52

1 x MFB0159210 - HINGE ASSY-A, LH @ $13.33





This is the backglass seal.


This is the ext rooftop moldings

[bravekozak]

I am going to see if they have some blank plates for the extra long arm rests. I'll keep everyone posted.

[Basement_Modder]

I searched for that crossmember posted on the first page, and found two variants. The other one had no picture tied to it. Is it safe to assume its the manual version?

Here were the results:

[rmoltis]

I'm surprised that this thread hasn't clicked over a few more pages by now.

sent from the depths of hell.

That's because they only supply the piece name/number with no description or pictures.
It is difficult for people to work up the confidence as to the part they are purchasing is correct beforehand as seen in the quote below.

I searched for that crossmember posted on the first page, and found two variants. The other one had no picture tied to it. Is it safe to assume its the manual version?

Here were the results:

It's never safe to assume anything.
I'd give the guy a call and ask him questions.
Or find a site that gives you a visual breakdown/representation of that part w/identifying part #

[jawbraeka]

That's because they only supply the piece name/number with no description or pictures.
It is difficult for people to work up the confidence as to the part they are purchasing is correct beforehand as seen in the quote below.



It's never safe to assume anything.
I'd give the guy a call and ask him questions.
Or find a site that gives you a visual breakdown/representation of that part w/identifying part #

If you want a parts list for the festiva gtx.. Hit up yahoo Japan.. You can get all jap specs and parts for all makes from there.. I think its like 9 bucks plus shipping.



sent from the depths of hell.

[1990new]

In response to the comments about how difficult it is to identify the parts classified as "Hyundai/Kia Pride"
on the FourGreen online parts web pages:
I downloaded all the parts into an excel spreadsheet with description and price. There are currently 2367 parts listed in this category and 295 of these parts have pictures shown (a little over 12%). Even when a picture is shown, it is difficult to be certain that the part is really the one that will fit our US and Canada Festivas. As an example, neither of the headlight assemblies will fit our Festivas. I ordered 3 of the steering rack bushings and the outside diameter is too big to fit the pre 1990 manual steel rack (haven't checked the aluminum housing one yet). Also when you use the description search, and multiple part numbers are show on the same line for a description, there is apparently something wrong with their query because when multiple part numbers exist for the part, the string of part numbers that are displayed are not the same as the part numbers that show up
in the detail display for the part. From the information that I have been given by FourGreen, when multiple part numbers are shown for a part line item,
they are identifying the same part (but this could also be a misunderstanding). I have not talked to anyone at FourGreen and my email communications apparently are not understood very well. I think they are sincerely trying to understand and help us so we would be able to identify and order more parts, but apparently the employees hands are tied there. At this point about all I guess we can do is pass the information about which part numbers have been proven to fit among ourselves. The last group order that brave put together identified lots of those parts and others have identified several more. I plan to add columns to the spreadsheet to flag the parts that have been positively identified. I was also experimenting with putting the 295 part pictures in the spreadsheet but that is proving to be too time consuming and it also make the spreadsheet much larger, so I'm just going to flag the ones which have pictures and possibly put links to FourGreen for them.
At this point I am thinking about offering to put together a group order and maybe have an end of February deadline for people to add parts to the order.
I figured this would be a good place to put out a feeler to see how much interest
there is in this. An employee at FourGreen has offered to use an emailed spreadsheet that I would send him to verify the availability of the parts before the order is actually entered. For small lightweight items in common demand, I would be willing to pay in advance and let you pay me when I ship to you. For larger/heaver/high cost items, I would request a prepayment of the part list cost plus 50% and then calculate the proportional Korea shipping and US shipping to you, and bill you or refund you depending on the calculation result. This order would not include large bulky items that would requirement shipment via sea. For you guys in Canada, the shipping from the US is costly and a bit of a headache. If you are willing to pay for the added expense, I would ship to you, but If you can get someone to pick up your part at a US shipping address, it would be much easier and less costly.
I don't plan to do this to make money, but I would like to come out not losing and at the same time save some members some of the high shipping cost from Korea.

Also keep mind that it is possible that you may be able to find some of the more universal parts listed on the FourGreen site available at a lower cost, considering shipping, here in the US or Canada.

If you are interested in joining a FourGreen group order that I would put together or you would like to initiate and take charge of the group order yourself, PM me.
If I find there is lots of interest by the end of next week, I will start a Group Order thread or join another one if someone else would like to do the order.

[shadetree]

Has anyone found the part number for steering boots ?

[Aaronbrook37]

Has anyone found the part number for steering boots ?

On two occasions, I've used the part designed for the 1996-2000 Honda Civic. They worked perfectly!

[1990new]

Steering rack boots part number for Pride

Has anyone found the part number for steering boots ?

KK1363212XA

http://koreanaparts.ru/parts/kia/pride__festiva/113/3220B/KK1363212XA

http://www.fourgreen.com/store/scripts/BOOT-ASSY-p-KK1363212XA


Russian schematic shows power steering rack...I don't know if they are different.


There is a lot of interest.... I will be posting the 4Green Group Order thread later in the week.