Fault codes

[freshtiva]

Any one have a chart of the fault codes for the Festiva ? I have this sample chart but "sample" worries me. Also anyone have the non-naao section of a 1992 Power Train Control /Emissions Diagnosis Manual.

[phantorn]

what code you got?

[jglutz]

I Have 92 code info....fORD POWERE TRAIN CONTROL...a hard one to come buy
what you show....right column is the output from the module to the check engine light.
do you want how to obtain the code...STI connector
do you want all the code descriptions]
do you want both...please post
can email imagest. can not link images yet.

[freshtiva]

Thanks jglutz, I think I know how to obtain the code using a voltmeter. I wish I had a superstar tester and adapter but the voltmeter will work fine. What I was wanting was the one or two digits codes and what the codes represents. Kind of like the chart I posted. 01 = broken wire, 15= oxygen sensor output low, etc. I also want to get the procedures from the 1992 power train control /emissions diagnosis manual for the quick test and the switch monitor test. My email is shadranjohnson@embarqmail.com

phantorn: I'm not getting any code right now I'm just studying my favortie subject, Festivas The self test connectors arent much use unless I know how to use them.

[neanderpaul]

Ahhhh the favorite subject. It would be cool to have the codes as a sticky. jglutz, to link images upload to photobucket (free). Good luck.

[WmWatt]

The codes are in the Haynes manual. After they went with the industry-wide OBD standard sometime in the 90's all you need are the OBD (On Board Diagnostics) codes all the car manufacturers use.

[FB71]

1996 OBDII was rolled out nation-wide

[freshtiva]

The codes are in the Haynes manual. .

Anyone have the Haynes manual with the codes ??

[F3BZ]

like this?

[F3BZ]

and this?

[freshtiva]

^ Thank you F3BZ Ive made copies.