Rear suspension question, and engine question

[navdoc101]

i agree it belongs in repair thread. if tire size was 12 in, tires wouldnt rub. monro gas shocks in rear,will raise rear a bit.it might help rub. re check all hoses and rubber lines again for cracks. a fuel pressure regulator might help.along with a new fuel filter.

Don't you read? He said in fist post he has 13" wheels from a 323, & later that he has 175/70-13 tires!

[FestYboy]

no, he doesn't. just shoots from the hip...

[Garsdad]

Update time.

It ain't from tire deflection. I boosted the presure to 38 PSI, and it rubs at parking-lot speeds. The axle is definitely shifting around. I would like to order some universal bushings from energy suspension, but this is my daily driver and I can't pull it apart to measure the diameters and then let it sit while I wait for parts.

Does anyone know the outside and inside diameter of the bushing where the axle connects to the body? Don't make me pull it apart to look...

[Movin]

Update time.

It ain't from tire deflection. I boosted the presure to 38 PSI, and it rubs at parking-lot speeds. The axle is definitely shifting around. I would like to order some universal bushings from energy suspension, but this is my daily driver and I can't pull it apart to measure the diameters and then let it sit while I wait for parts.

Does anyone know the outside and inside diameter of the bushing where the axle connects to the body? Don't make me pull it apart to look...

:eeeeeek: if that is that bad there should be lots of shiny metal showing??