My B3-T setup

[bobbyspider]

i have a swift clutch with my festiva trans, holds with 13x10 toyo ra1's on a b6T with 14 psi... havnt had a trans break yet either!

Your going to be hitting a sharp wall soon and its going to be the b3 fuel pump!

i ment to quote this in the last post sorry

[bobbyspider]

hmmm do you think that set up would hold up on a bp

[DriverOne]

8PSI? That's pretty conservative. I highly recommend port polishing your head. Your exhaust ports are 90 degrees like a picture frame! They'll do well to have the corners honed a little. You've inspired me to mount my IHI VJ-11 to a B3.

[FastOrBust]

yea its stong enough to handle the 8lbs im throwing at it

[Bert]

As with any overworked engine I'm awaiting to see how long the motor lasts with that getup. But I got to hand it to you for ingenuity and improvisation.

[BUSTIVA]

im using the intercooler from a ford probe on my b3t and put a spec stage 2 clutch in

How do you like the clutch? Is it strong enough?

[FastOrBust]

im using the intercooler from a ford probe on my b3t and put a spec stage 2 clutch in

[DriverOne]

BUSTIVA, check out the Beetle Turbo S intercooler. It's a side mount. Not big, but it should both fit in there and both ports are on one side.

[BUSTIVA]

i have a swift clutch with my festiva trans, holds with 13x10 toyo ra1's on a b6T with 14 psi... havnt had a trans break yet either!

Your going to be hitting a sharp wall soon and its going to be the b3 fuel pump!

I'll look into that setup, thanks. And yeah the fuel pump is coming out soon, I have a few stock civic pumps, and walbro 255 laying around so I should be good.

I ran a 15.82 @ 82 mph with my homemade b3t rear turbo too. I had a good clutch tho. and on 15's

Nice to know! Have any specs on the turbo and boost level?

[eurotiva]

I ran a 15.82 @ 82 mph with my homemade b3t rear turbo too. I had a good clutch tho. and on 15's

[festyfreak39]

i have a swift clutch with my festiva trans, holds with 13x10 toyo ra1's on a b6T with 14 psi... havnt had a trans break yet either!

Your going to be hitting a sharp wall soon and its going to be the b3 fuel pump!

[Ford Fester]

Stock clutch does slip at around 100 hp I did a b8 swap a couple months ago and it instantly started slipping. Mostly in 3rd. Nice work...now you can say you did it instead of I want to do it.

[BUSTIVA]

I'd like to see some numbers, like HP, TQ, 0-60, 0-100-0...

Im really curious of the potential numbers, i still have stock brakes so not sure that 0-100-0 will be impressive lol. Ive heard that the stock clutch starts to slip at 100whp, not sure how factual that is, but if so thats a great sign for me lol. My clutch slips like crazy.

[DriverOne]

I'd like to see some numbers, like HP, TQ, 0-60, 0-100-0...

[gorgonheimer]

From Jackson to Houston's a pretty long drive....