My B3-T setup

[bobbyspider]

you can use the E series as long as you roll on the throttle. the tires will brake loose well before the trans does in that case.

so as long as i dont go w.o.t. i should be fine? i can just see me going through a trany quick you know how i drive arty . oh well ill do it any way and when i do go through the trany ill just upgrade then. is there an available preformance clutch that is reasonably priced for the e-series trans that i can buy?

[91mcnasty]

So you don't think A ceramic puck would be to harsh on tranny's?

[FestYboy]

why wouldn't it? as long as it doesnt slip and doesn't slam the input shaft, you're good to go.

[91_festy_Gl]

I used a 6 puck ceramic on a N/A bp and I couldnt get it to slip at all. Not sure if it would be ideal on 20psi.

[FestYboy]

clutch material doesn't matter so much as it's engaugement (i.e. use a sprung hubed disk).

[91mcnasty]

Let's say 20 psi.(of course there's alot of variables) I'm talking about a disk style clutch, I figure a puck would just make things go bang!

[91_festy_Gl]

Do you guys think An f should hold a boosted bp with a good clutch?

depends on how much boost.

[91mcnasty]

Do you guys think An f should hold a boosted bp with a good clutch?

[FestYboy]

you can use the E series as long as you roll on the throttle. the tires will brake loose well before the trans does in that case.

[91_festy_Gl]

F-series would be plenty in my oppinion.

[bobbyspider]

Oh yea thats rite haha. I need to come see ya soon bro! No work just fun

So what trans for us single cam guys that want to boost without going through clutches?

[FestYboy]

^ bobby, yours was an input bearing failure.

[bobbyspider]

Arty and I had to replace mine because of what we suspected to be this issue. So should I just plan on a trans swap? What trans should I upgrade to when I boost the b6?

[FestYboy]

^yup exactly.

[91mcnasty]

Like fastiva has shown a couple times haha