14x5.5

[frankenfester]

if you can replace a clutch, you can do a b6/BP swap

The 323 swap?

-James

[FestYboy]

323 or EGT, one is bolt in, the other requires 2 wires and lower the front of the crossmember to rotate the engine off the firewall and a no weld passenger mount. both can use the factory trans without issue though the BP needs a gentler touch to keep the trans intact (roll on the throttle, no slamming gears). use their respective ECUs and VAFs and off you go.

[frankenfester]

323 or EGT, one is bolt in, the other requires 2 wires and lower the front of the crossmember to rotate the engine off the firewall and a no weld passenger mount. both can use the factory trans without issue though the BP needs a gentler touch to keep the trans intact (roll on the throttle, no slamming gears). use their respective ECUs and VAFs and off you go.

I may have to track these down.

-James