Wheel options

[FestYboy]

^ those are rare as hen's teeth anymore

[Advancedynamix]

^How much drop is that?

Around 4" I think.

[Advancedynamix]

I'm sure they're cast. All I'll do is round off the edges around where the cap clips on to make a smooth transition like the OZ's. Shouldn't be too much material removed. 6" wide is plenty with 165/50's. The only info i e found says that they're +40 offset which seems extremely high. There's one on eBay for really cheap, might buy that one and see what it'll take to fit them and if I can round out the cap area without removing too much material.

Those Maxima wheels are boat anchors. Clay (AZGTX) has a set stashed away and I thought they were sweet until I lifted one. lol

[theastronaut]

Those Maxima wheels are boat anchors. Clay (AZGTX) has a set stashed away and I thought they were sweet until I lifted one. lol

Well darn. They can't be as heavy as the steel/polycast Escort wheels? They slowed the car down and killed off about 3-4 mpg over the stock wheels.

[Festiver]

Well darn. They can't be as heavy as the steel/polycast Escort wheels? They slowed the car down and killed off about 3-4 mpg over the stock wheels.

If you can my suggestion would be to save up and get some o.z. turbo wheels

[Advancedynamix]

They even look good all dirty.

Note: I welded the cap register and removed the cap standoffs on these and smoothed them in a late like what Theastronaut is talking about doing. Then I had them powdercoated. I like this look better than what they originally looked like.

[Wimp]

I've been looking for sticky 14" tires for awhile now and have found nothing available in the US so I've started looking for 15" wheels. I think I've decided to go with modified 15x6's from an 80's Maxima. Hopefully they look better than that sounds... :lol:

*snip*

I've found a retailer selling Nankang NS-2R in 165/55-r14, for around $80-$85 a tire depending on UTQG (Even though they very seldom if ever list the tread wear ratings on their website). Though from what I've heard from one or two former customers the retailer is shit about keeping up with their stock, and tend to be a bigger headache than what most people will tolerate.

[theastronaut]

Onlinetires lists them but they're not in stock and won't be for 1-2 months.

[Advancedynamix]

Hey John, here's the real deal for ya!

OZ RALLY WHEELS

[Festiver]

Hey John, here's the real deal for ya!

OZ RALLY WHEELS

Damn that's a good deal

Sent from my XT1585 using Tapatalk

[Greywolf]

What I'm looking at is these:

http://www.inovit.com/Web/ProductDetail.aspx?ID=040E95BC8BA1C1D7

With Federal Formoza FD1's on them. The weight reduction should be significant.

[Festiver]

What I'm looking at is these:

http://www.inovit.com/Web/ProductDetail.aspx?ID=040E95BC8BA1C1D7

With Federal Formoza FD1's on them. The weight reduction should be significant.

I can't open the link

[william]

Works for me.

[jdobbs86]

Hey John, here's the real deal for ya!

OZ RALLY WHEELS

•_•

Must... Not... Buy...

[Festiver]

Works for me.

My phone is probably just being a jerk

Sent from my XT1585 using Tapatalk