Tweet
I got it from diyautotune.com. I got the msII, relay board, stimulator, cables, boost control mod, and 4bar map sensor. I was going to use a miata cam sensor and coilpack but I didn't pay attention when ordering. You can only do that with msI so im going to use the edis4 from a 91-93 1.9 escort/tracer instead. I got all the parts for it from the junkyard I just gotta order the sensor and tone ring.
-
Better Than Nothing Racing
Way too many cars
:woc: -
sweet, thanks for the infoOriginally posted by shorestiva View Post
where did you learn all this stuff? got any links to some good reading stuff?
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
poke around diyautotune they have a bunch of links and infoBetter Than Nothing Racing
Way too many cars
:woc:Comment
-
Will be very interested to see this when its complete
91 L - modified to SLX- "Tin Can Project"
http://www.cardomain.com/ride/2850897
92 GL - parts car
97 aspire - parts car
87 323 DX - daily driver
Visit My Store - New Products available!
http://www.cafepress.com/tunner
Car enthusiasts will respect all makes and models that preform.
Brand enthusiasts are the root of all problems in the car community.Comment
-
hey shorestiva, can you do me one favour? can you wright down which wire you put to what on the motor? and what not... you know, kind of make a wrigh-up on it? im sure lots of people would like to read it and do it to thier b6t... especially me
Last edited by sasquatch; 08-07-2009, 01:17 AM.
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
^ ooooo and take lots of pics please i hope im not asking to much from you lol...
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
you mean for the megasquirt wiring?Better Than Nothing Racing
Way too many cars
:woc:Comment
-
I guess that is what he meant and I second that as well!! Thanks in advance. Allmost forgot to say that it looks like this is going to be,by far, the best Festiva resto to date. Keep the updates coming.Last edited by festurbo; 08-07-2009, 06:56 PM.There is replacement for displacement! Less weight and BOOST!!!Comment
-
thanks guys. Ill try to put a write up together if I ever get it back together.
rear suspension is back in
Its going to be low. With the perches the whole way down the 13s are tucking.Better Than Nothing Racing
Way too many cars
:woc:Comment
-
oooooo WOW that looks awesome ^^ and yes this has got to be the best festiva resto ever... by far the best high performance festiva resto and yes i mean for the MS wiring... i heard its easy but i have a way of screwing up easy things lol...
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
Ill try to I tend to get distracted and forget to take pics till im done.
Im freakin tired of sanding on this durn thing. Been wet sanding all morning just have to do the hood and the drivers fender then buff the thing.Better Than Nothing Racing
Way too many cars
:woc:Comment
-
love those rims!
Comment
-
I finished the wet sanding yesterday. Also took the carpet and hosed it down. Got most of the sand and dirt out but its still full of dog hair.:angryfire: I was planning to buff it today but my friend didn't bring the buffer.
Theyre a old set of 13" prolines (I think?) that they used to sell at pepboys.Better Than Nothing Racing
Way too many cars
:woc:Comment
-
Looks better!"Lane, I've been going to this high school for seven and a half years. I'm no dummy."
Gone but never forgotten, "Hulkstiva"...http://www.fordfestiva.com/forums/sh...ht=progressionComment
-
That looks stunning - cant wait to see it back together
91 L - modified to SLX- "Tin Can Project"
http://www.cardomain.com/ride/2850897
92 GL - parts car
97 aspire - parts car
87 323 DX - daily driver
Visit My Store - New Products available!
http://www.cafepress.com/tunner
Car enthusiasts will respect all makes and models that preform.
Brand enthusiasts are the root of all problems in the car community.Comment
Comment