BP swap time

[postman101]

Well i took the car of for its first drive sat only had one small leak from a heater house but got that fixed. The exhaust is all that i have to do now i have a temp set up on there now but it still leaks. So the plan is to see if i can get a 2 1/4 exhaust put in. Here are some pics......

[thered56]

Niice! So, you took it for a drive...how impressed are you by the difference??

[postman101]

I am very impressed!!!

[lanemeyer14]

Like how you went about keeping the battery and intake in the normal spots!

[postman101]

lol ya i didnt want to move the battery.

[freshtiva]

Very nice ! Ive been thinking BP swap too since I have the motor. Id like to use the motor and G25mr tranny togather, but its not looking good.

[festivaWES]

You're scared aren't you!!?? ^^

[freshtiva]

No, just lazy .

[postman101]

Well i finally have an update about the swap and how it was doing for the past few months. The BP i put in the car had great compression but the oil rings were done and i was burning 2L of oil in less than 1000km. After some time i decided it would be cheaper to get a new BP so i found one with 180,000km for $120 and did the swap this past weekend. The car now runs like a top and this engine was in way better shape than the last. Here are some pics....




here is one of the wheel i got out of an 88 323 gt

[LightWeight]

looks sweet!

[resuwrecked]

Whoo!! Now its BP+T time!!! As soon as i finished my swap i was ready to t-charge it. nice work postman.

[postman101]

Whoo!! Now its BP+T time!!! As soon as i finished my swap i was ready to t-charge it. nice work postman.

ha i dont want to go bp+t there would be no way i would ever get grip lol.

[David88]

This looks like a very nice job. Did you have to rework the fire wall at all? From the pics it doesn't look like you did. I've bee wondering if there is a way to avoid the mashed in firewall.

[krazy4]

This looks like a very nice job. Did you have to rework the fire wall at all? From the pics it doesn't look like you did. I've bee wondering if there is a way to avoid the mashed in firewall.

I would like to know also. I would want to avoid that as well when I do my swap.

[freshtiva]

This looks like a very nice job. Did you have to rework the fire wall at all? From the pics it doesn't look like you did. I've bee wondering if there is a way to avoid the mashed in firewall.

I would like to know also. I would want to avoid that as well when I do my swap.

Me three !!