My KLZE Festiva Build Thread

[Lmcclure]

turbo time

[NovaSS]

Is there anything else you should replace while you have it out and apart? Cam/ crank seals, water pump etc?

[Nerd Racing]

man that sucks... I gotta get a move on finishing putting mine together... I have to learn to tell my family no once in a while first... been fixing everyone else's cars...

[Damkid]

well i've found an antifreeze leak unfortunatly, and just as i had feared the water outlet i had to replace, is leaking, and this is how far i have to tear the engine apart just to fix the leak



so in other words, i'll be pulling the engine this weekend :angry4::angry4::angry4:

[Maxtiva]

This is a pic of a SHOgun

[Oren09]

Is that a custom cluster? How about a close-up of that?
Also, what seats and shifter do you have?
That's a nice interior.

[Damkid]

Here is a converter that I found. http://www.dakotadigital.com/index.c...rod/prd127.htm

Thanks for the link, it looks like my best option for getting my tach to work properly, so i may use a small aftermarket tach until i can get one of those

And sorry, i'm not a fan of those huge monster tachs :lol:

[NovaSS]

autometer monster tach

[sasquatch]

autometer monster tach

[FestYboy]

Drive it like a nearsighted, slow witted, paranoid old lady on Valium. :p

Karl

"Oh Pot, this is Kettle, you're black!"

[resuwrecked]

http://www.msdignition.com/uploadedFiles/MSDIgnitioncom/Products/Ignitions/6420_instructions(1).pdf

Page 4- Cylinder Select. You might want a MSD box anyway down the road so this will do it for ya.

[resuwrecked]

Get a msd box. you cut the little red wire so it outputs correct signal for a 6cyl, then hook up a tach adapter inline to the stock tach so it works. I have a MSD 6AL BTM and a tach adapter so my factory tach works.

[FB71]

no, you cannot just add resistance. Tachs are frequency meters, or 'event counters'. Basically, the interface adapter outputs two pulses for every three it sees.

[chrisofna]

That's the one everyone uses for the pick-ups.

[wybnrml]

There's some company that makes a converter for the tach

Here is a converter that I found. http://www.dakotadigital.com/index.c...rod/prd127.htm