Announcement

Collapse
No announcement yet.

sasquatch's bp swap thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ^^ x2
    At least it's an improvement though.

    HOW do you forget your camera?? :p

    Comment


    • 15.7 is still not a bad time for a BP

      1988 323 Station Wagon - KLG4 swapped
      1988 323 GT - B6T Powered
      2008 Ford Escape - Rollover Survivor

      1990 Festiva - First Ever Completed KLZE swap (SOLD)

      If no one from the future stops you from doing it, how bad of a decision can it really be?

      Comment


      • Originally posted by Damkid View Post
        15.7 is still not a bad time for a BP
        it should be faster...

        exhaust/intake cam swap, full exhaust, new tires, new injectors and a touch up on the tune is comming up....

        or ill be putting it on hold for a bit and im gonna pick up a sidekick/tracker and save up for putting the turbo in the festiva... just do it all in one big step...
        Last edited by sasquatch; 04-24-2011, 03:29 PM.


        Mike, AKA the sasquatch
        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

        Comment


        • wow 15.7 that is what i am running in my festiva and its a 100% stock bp engine even down to the spark plugs and wires. I am working on getting mine t-charged as well.

          Comment


          • Where you are above sea level plays a big role in how fast you can run. I did 15.7 here at 1500 feet above sea level.
            Last edited by postman101; 04-28-2011, 04:28 PM.
            BP Festiva on MS2 with gsxr itbs Woot!!!

            Comment


            • this exhaust is the problem... i bet you ill get 135hp or more when i get the exhaust and cams in it...


              Mike, AKA the sasquatch
              1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

              Comment


              • That'd be pretty sweet man. What cams are you using? Just get it done for Westiva eh! I wanna see Zippy there!

                Comment


                • im putting a bp26 turbo exhaust cam on the intake side.... or put it on the exhaust side and swap the old exhaust cam to the intake side... i dont know yet... then i think im gonna mess with the cam timing a bit too while on the dyno if there is time... i cant wait to hear what it will sound like with a 3 inch exhaust and ill try my best to have it there at westiva...


                  Mike, AKA the sasquatch
                  1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                  Comment


                  • ok so i have been driving it for the last few weeks and i have figgured out lots of things wrong with it...

                    IF YOU WANNA SKIP THE LONG POST just read the last bit from the >>> on...)

                    the "coilovers" (ebay springs and adjusters) i have in the car are set to low and are stuck (cheap metal has sized together lol...) it looks good that low but it bottoms out HARD when i hit most bumps... so i need some "real" coilovers... and depending on what i get, it will be between 350 and 800 bucks... (raceland ones VS KW or Ksport ones...)

                    the injectors are sticking alot now... i have tried alot of things to get them to stop sticking but its not working... im gonna get some nice new ones that are bigger cc but will still give me a better idle than the ones i have now... but they are 420 bucks...

                    the exhaust is junk... no better way to say it lol... so that needs to be changed, and the mufflerS i want/need to put in are about 220 bucks and the v-bands are another 50 bucks or so... so thats 270 bucks

                    the intercooler, piping and t-bolt clamps im getting are 250 bucks once i pay for shipping and stuff...

                    wastegate, 250 bucks (im not trusting a china one...)

                    the exhaust manifold... all the stuff for that is gonna be about 150 plus shipping... and to get my exhaust piping, exhaust manifold and intercooler piping all welded up is gonna cost me about 50 bucks to pay my friend for his cost to run the tig welder... (gas and rods...)

                    i also need to change the rear motor mount to metal, not the rubber one i have now... its making my launch a bit scary...

                    new bigger fuel pump about 70 bucks off ebay...

                    i also need a new wideband, my old one is acting up even tho i just got a brand new sensor for it... it reads right, it just take forever to warm up... and its kind of hard to read in the day time, so im getting a new LC-1... about 350 bucks...

                    and i am putting 500 bucks to the side for other odds and ends like oil lines for the turbo, fittings, nuts and bolts, tune up parts for the motor and other things that i have forgotten about that i will need to compleat the turbo install...

                    so i have figgured out that just to get it running good again (injectors, exhaust, wideband and a re-tune) is gonna be about 1100 bucks...

                    and if i wanna put the turbo on it, its gonna be about 2400 bucks... with everything... and i know what your thinking... 2400 bucks is crazy, just to put a turbo on a motor... but if you do it RIGHT you wont have as many problems and it wont look like a blind monkey did it... i wanna do it right...

                    this isnt including the coilovers... so if i wanna get those on with the turbo 2800~3200 bucks...

                    >>> so what do these numbers mean? it means im taking a break from the festiva im gonna pick up a tracker/sidekick and drive that untill i get enough money to buy all these parts for the festiva... and when its finaly done and ready to drive again, its gonna be so bad @$$ just looking at it may overload your mind and cause it to blow up in a big ball of fire

                    ill keep all of you updated on parts i get over time and everything else that happens with it...

                    (wow, that may be the longest post i have ever made... anyone know why my fingers hurt? i cant figgure it out lol..)
                    Last edited by sasquatch; 05-15-2011, 12:49 AM.


                    Mike, AKA the sasquatch
                    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                    Comment


                    • Sounds good man. Unfortunate that you're gonna need to take a break to get the money. That's where I've been for awhile now though, and I've only got a bare shell right now...lol

                      I like to hear that you are putting the money into it to do it all well. No, I don't think $2400 is crazy, not at all. What turbo have you got in mind?

                      Comment


                      • i have the turbo allready... its a t3/t04e 57 trim... a little big, but will get me lots of power, and look awesome


                        Mike, AKA the sasquatch
                        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                        Comment


                        • I can totally relate to the dam turbo parts costing too dam much, that why my turbo build has kind of stalled out... I want to do it right the first time without taking out a loan :lol:

                          1988 323 Station Wagon - KLG4 swapped
                          1988 323 GT - B6T Powered
                          2008 Ford Escape - Rollover Survivor

                          1990 Festiva - First Ever Completed KLZE swap (SOLD)

                          If no one from the future stops you from doing it, how bad of a decision can it really be?

                          Comment


                          • And I thought I had spent a lot a lot on my car already.
                            91 Festiva BP Autocross/Track/Rallycross hopeful
                            14 C7 Z51

                            Comment


                            • Lol my capri parts car $1,500 and Festiva was $800. That's with 2 different cars not swapped together at all.
                              1988 Ford Festiva "Sonic" BPT g25mr MS2 standalone ecu, FOTY '11, Best Beater FMV, Fan Favorite FMVI

                              1989 Ford Mustang GT 5.slow

                              1996 Ford F-150

                              Comment


                              • ya and i also am worried about the trans in the car... even on 10 psi i dont know if the trans will hold... so i may want to swap in a kia trans while im putting in the new motor mount... and im thinking ill make a new sub frame that will be solid mount so it wont flex and ill also add some traction bars at the same time... i think ill also get some 22x8x13 slicks at the same time... i think ill need them lol.... and maybe a cage... oops i just spent another 2000 bucks


                                Mike, AKA the sasquatch
                                1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                                Comment

                                Working...
                                X