^^You can pull the VSS out of the EGT trans and use the Capri XR2 cable
Probe's use a VSS as well and i just pulled it out of the trans and stuck in the Capri XR2 cable that i have, G series tranny's are remarkably interchangable
Announcement
Collapse
No announcement yet.
My last engine swap build thread, FANTASTIVA
Collapse
X
-
Yeah mine has a cable but its unlike the festiva cable on both ends, at the tranny and the gauge cluster.
Leave a comment:
-
You will prolly have to run the egt speedo cable i believe. The way it connects to the tranny is way different.
Leave a comment:
-
Originally posted by Nerd Racing View PostHmm, I have not thought about swapping the coolant outlet from a festiva to a BP before... might have to do that with this one.
Leave a comment:
-
I don't know what the Festy upper cable is like, but my aspire upper screws to the xr2 lower cable.
Leave a comment:
-
Hmm, I have not thought about swapping the coolant outlet from a festiva to a BP before... might have to do that with this one.
Leave a comment:
-
^ it will work, but not as well as a Denso unit (explained elsewhere in the forum). also i don't believe the Denso is as long as the Bosch unit (affording you more clearance).
Leave a comment:
-
Originally posted by FestYboy View Postlooks like a Bosch sensor... correct?
Question:
What do you guys do for a speedo cable ? The egt and the festiva have totally different set ups. My EGT had cruise if that makes any difference.
Originally posted by Damkid View PostHaha :lol: you would hate my car with a passion :p
Leave a comment:
Leave a comment: