Dr Dan's B6 build

[FestYboy]

i was just stating that a non HD Stage eleventybillion will also hold up to the current build (attesting to the abuse that a stock clutch can take).

[drddan]

hmmm I put a stock replacement clutch up to a load of abuse with a stronger version of your setup with no hint of slipage (same trans and flywheel as you, but a hotter engine)

Yeah, I been kickin around what I should get for variuos things, like the clutch and so forth, but this was on ebay, for $98 and change, with a "make offer", so I did.
I Offered $75, and with shipping was only $90 delivered to my door

Its a Bahnhof clutch (who????) A clutch put together with Exedy, Luk, and other parts.
http://www.ebay.com/itm/160586629986...84.m1423.l2649

Info I found by asking the seller:

Dear customer,
BAHNHOF is an independent clutch brand from Autoparts-express. For that purpose we use components for different manufacturers such as: Exedy, NKK, Luk, Competition Clutch and Seco; depending on the car. If you have any more questions, please contact us. Sincerely,


Auto Parts Express

I found a few threads on a Toyota forum, I think it was, and no one had anything bad to say about them, and seemed to like them.
(But thats a Toyota forum, what do they know?) :p

[Festiva_Fred]

Sweet! I'll be watching, gonna be doing the same exact thing later this year

[drddan]

This is where I work on Cujo

In the "Hillbilly Garage"


...which collapsed 2 days after that pic, from the torrential downpour sunday night. I awoke monday morning to find the tarp had fallen into the the empty engine bay, filling it with like 50 gallons of water! LMAO! Oh well, no harm.

Yuck, dirty engine bay. Have to work on that!

[FestYboy]

hmmm I put a stock replacement clutch up to a load of abuse with a stronger version of your setup with no hint of slipage (same trans and flywheel as you, but a hotter engine)

[drddan]

I am ordering parts, and trying to find info on things I still yet need to get.

Ordered a Stage 1 clutch kit today, to put up with the B6 engine.
I am using a Festy 5 spd tranny and flywheel, so the clutch needs to be a little stronger.

I already have these gaskets to put on the B6 too. No oil leaks on the new paint! :nono:





I need an exhaust system, manifold to tailpipe too. Presently working on getting that together.

[drddan]

I managed to paint a few other things

oil pan


coolant tube
man, was it dirty and rusty!




and my favorite



Its not done yet, the wrinkle paint takes a LONG time to dry!!!
I messed up a small spot on it after 24 hours of dry time, by handling it to finish up the surface of the ribs! The ribs I pre sanded and masked off with painters tape before applying the black wrinkle. I fixed the small smudge on it by spraying the wrinkle paint into the paint cap lid, and using a toothpick dipped into the paint to roll on the smudge. It blended perfect.

Its going to get 3 days more days, at least to harden up, before I touch it again!

[drddan]

Well hey all!

I asked a few peeps here if I should start a build thread on my B6 swap, and all said, heck yeah, so here we go....

I actually kinda started a swap thread a while back, but it got off to a bad start See here
http://www.fordfestiva.com/forums/sh...ad.php?t=42416

I thought it would be better if I started again with the B6 I have now.

This is going to be a carbed B6 using the Weber 32/36 downdraft carb I had on the B3, using the B3 intake manifold to make the carb conversion on the B6.

This to me has been a slow process. Life keeps happening and havent got to it like I wanted, but it is moving forward.

The engine I have to work with this time. Looks like it was taken care of at least. Nice that all openings were capped.





I cant put an engine in without painting it ...and...everything!

The block now





Apparently I didnt get the block as clean as I wanted by the head (dull spots near head)
Dont know if i'll redo or not, but it will prolly bother me....