Announcement

Collapse
No announcement yet.

4GREEN GRAB BAG

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • F3BZ
    replied
    i never actually removed one of these from a festy but just looking under the dash seems to confirm that this pride pedal assy is correct. only puzzle is that the axial return springs shown in the diagram (marked with asterisk) aren't visible on this assy. still, a smokin deal at $43 and heavy too. shipping is gonna be about as much as the part. kia part# KK156 43 300K.




    Leave a comment:


  • F3BZ
    replied
    the 4G tailites have no DOT approval molded into the lens so they are for OFF ROAD USE ONLY.

    Leave a comment:


  • Twistiva
    replied
    Originally posted by moz View Post
    Great find! I was very sceptical about paying $180 for a set from the Philippines.
    Edit.... Talking about the euro lights also
    I actually bought the last set (so I was told) from Junspeed about (18?) months ago. Paid about $100 for them, I think? Nice to know FourGreen has 'em!

    Leave a comment:


  • nitrofarm
    replied
    Originally posted by F3BZ View Post
    the engine cradle bushings get all squished and split after 20 years. here's new replacements for the front and rear. either bushing was $1.43 and the special bolts just .81 cents.

    Oh Yes,this pic makes me Happy.

    Leave a comment:


  • jawbraeka
    replied
    Same here

    Sent from the depths of hell.

    Leave a comment:


  • moz
    replied
    Great find! I was very sceptical about paying $180 for a set from the Philippines.
    Edit.... Talking about the euro lights also
    Last edited by moz; 03-01-2014, 09:23 PM.

    Leave a comment:


  • Spike
    replied
    ^Now I know what I want for my birthday. Too bad they aren't smooth!

    Dang it. Was talking about the Euro taillights. :p
    Last edited by Spike; 03-01-2014, 09:01 PM.

    Leave a comment:


  • F3BZ
    replied
    the engine cradle bushings get all squished and split after 20 years. here's new replacements for the front and rear. either bushing was $1.43 and the special bolts just .81 cents.

    Leave a comment:


  • bravekozak
    replied
    I got excited just looking at those gaskets!
    Do you mind if I use that picture as my wallpaper for a while?

    They are sort of smooth. The ribs are recessed.
    Last edited by bravekozak; 03-01-2014, 09:09 PM.

    Leave a comment:


  • F3BZ
    replied
    here's a surprise 4G find. i wasn't really sure what i'd be getting when i researched these tailights that were listed for the kia 5 door philippines Pride pre-1995. these have the euro style turn signal placement. comes with gasket and light bulbs. the black housing isn't as shiny as the equivalent ford parts but that makes them easier to keep clean, and at $33.79 each, a steal. somebody was asking hundreds of $ for a set of these recently. RH - KK322 51 150B. LH - KK322 51 160B.




    Leave a comment:


  • moz
    replied
    The plug has 3 cables. One negative, one blinker, and one parking light.

    Leave a comment:


  • kumalaba
    replied
    Originally posted by F3BZ View Post
    not my purchase but this pic is from 4G website so someone bought it in the past. this looks like an early pride (pre-1995) corner marker with the pointed rear bottom edge. looks identical to the festiva corner light. anybody know for sure if it's a direct fit? part#s RH - KK150 51 060. LH - KK150 51 070.

    direct fit, the orange part is a bump(not flush with the clear part) cant remember how the wiring goes though.

    Leave a comment:


  • 1990new
    replied
    More info on KK15051060
    http://koreanaparts.ru/parts/kia/pride__festiva/107/5105A/kk15051060

    Leave a comment:


  • F3BZ
    replied
    not my purchase but this pic is from 4G website so someone bought it in the past. this looks like an early pride (pre-1995) corner marker with the pointed rear bottom edge. looks identical to the festiva corner light. anybody know for sure if it's a direct fit? part#s RH - KK150 51 060. LH - KK150 51 070.

    Leave a comment:


  • iriegnome
    replied
    Ooh.. I see.. I'm gonna pass on that then

    Leave a comment:

Working...
X