4GREEN GRAB BAG

[nitrofarm]

Looks like its a moisture seal of some sort. Off topic,but what is the best way to VIEW the Avella diagrams? The FourGreen sight doesn't appear to support them?

Sent from my USCC-C6721 using Tapatalk

[F3BZ]

valve, shutter. it's a rubber flap. only shown in the egypt pride parts catalog. any ideas what it would be for? it's shown by the red dot on the accompanying diagram. i might use them as doors on a birdhouse .

[F3BZ]

speedo gear set for ATX trans. this looks a little bigger than i remember. i'll have to verify with my existing one. again, this is for the ATX trans. $13.33.

[F3BZ]

clear corners w/bump. you'll have to add wiring to make the bump lamp work as a turn sig. the little harness for these is unavailable. only gave me one screw in each light. these seem to be identical to regular festiva lamps. $18.29 ea.

[jawbraeka]

^^ there good for stretching the light down the road as well as keeping "non kosher" light wattages out of other drivers eyes. (Illegally rated brightnesses and HIDs)

Sent from the depths of hell.

[Damkid]

^^personally I don't think I would ever use electrically adjustable headlights even if I had them

[jawbraeka]

Does anyone know the parts numbers for the electronically adjustable headlights from the kia range..

Basically, I'll need the part numbers for the following parts to go with them too..

Headlights, grille, spacers, wiring looms, switches.

As far as I know, they were from the Philippines and Germany.

Sent from the depths of hell.

[Twistiva]

are these the handles you got? this is what i was expecting when i ordered but the more deluxe ones came. it shouldn't happen but maybe the covered handles were a later version that replaced the more pedestrian ones and kia just issued the same part # to the updated handles. the ones here are stock on a 91 JDM festiva and the screws are supposed to be exposed. same center to center mounting points.

Nope. That is not what I received. I'll try to post a pic as soon as I can. Gotta send an e-mail and get back to work.

[jawbraeka]

Is that new upholstery under that plastic?

Got another question too?

Did kia ever release the funtop fabrics like with the Mazda as I'd like to at some point in time update my red grey striped interior with a new set of fabrics, same red grey striped as some of the fabric is a little worn on both front seats.. Also if there is a number for the rear splits too, that would be handy to have.

Thanks F3BZ.

Also, an idea too for those grab handles, if people get sick of their electric window armrests, decide to revert back to manual windows .. Install a couple of those puppies and I'll happily take those off your hands .. And with that tatty wiring that'll be sitting in the door, I'll happily take that too

Sent from the depths of hell.

[F3BZ]

are these the handles you got? this is what i was expecting when i ordered but the more deluxe ones came. it shouldn't happen but maybe the covered handles were a later version that replaced the more pedestrian ones and kia just issued the same part # to the updated handles. the ones here are stock on a 91 JDM festiva and the screws are supposed to be exposed. same center to center mounting points.

[1990new]

Hmmmmm.....OK, I bought the grab handle above, part # K8173 69 470B89, just like 'F3BZ' posted, but my grab handle is different. Instead of having one long snap-in 'cap'/trim piece that goes from end to end and covers the screws, the part I got has a molded-in center piece but NO 'cap' to cover the 2 screws.

Does anyone know the part number of the missing 'cap'/trim piece?

that's 4G B.S. these clowns are starting to get sneaky. the ones i got are pictured on their website when you punch in that part#. i'd send them a pic of what you got and ask for the right part or a refund.

Bump.

Anybody got an answer on this? Is there 2 front and 2 rear bushings? And....the bolts should be reuseable, aren't they?

(Edit: Hey, I just noticed I now have an even 1,000 posts on here. Cool! So do we get gold stickers on our foreheads when hit a grand?) :headbang:

Congratulations on becoming a member of the Senior Society Dan.

If I have communicated successfully with Four Green, you will soon be receiving 2 of the correct handle assist directly from them.
As soon as I receive the tracking number I will PM it to you.

[Twistiva]

So how many rubber bushings and bolts are needed to do a complete swap/change of said parts?

Bump.

Anybody got an answer on this? Is there 2 front and 2 rear bushings? And....the bolts should be reuseable, aren't they?

(Edit: Hey, I just noticed I now have an even 1,000 posts on here. Cool! So do we get gold stickers on our foreheads when hit a grand?) :headbang:

[Twistiva]

that's 4G B.S. these clowns are starting to get sneaky. the ones i got are pictured on their website when you punch in that part#. i'd send them a pic of what you got and ask for the right part or a refund.

Yeah, I double-checked the part number in your picture and when I typed it in the search box on FourGreen's site, the pix it brings up is exactly what you have pictured. Bummer.

twist, maybe I ordered the cap for the wrong handle?
I was hoping for a cover for the long armrests, where the power window controls snap in. Instead, 1990new's pics show a small square cap. I will examine them on Monday when I pick them up. If they aren't what I need, I will ship them to you.

Brave -

Nope, you ordered the correct part number for me. The part number on the package of the 'bad' grab handle is the exact same part number as on the 'good' grab handle in 'F3BZ's' picture. As far as shipping me the caps you have, don't bother. I ordered the same ones you did since they were so cheap. They are about 1" x 1" square and the ones I need are probably 1/2" x 1 1/2"....long and narrow to fit the inner mold of the handle. Thanks for offering, though.

I contacted FourGreen about this... here is my email and their response:


Dear Jesse ,

We will send you a replacement as soon as possible am very sorry for this fault .




Thanks

Zein

Jess, hey, THANKS for looking out for me. That's mighty nice of you! :thumbright:

[1990new]

Hmmmmm.....OK, I bought the grab handle above, part # K8173 69 470B89, just like 'F3BZ' posted, but my grab handle is different. Instead of having one long snap-in 'cap'/trim piece that goes from end to end and covers the screws, the part I got has a molded-in center piece but NO 'cap' to cover the 2 screws.

Does anyone know the part number of the missing 'cap'/trim piece?

that's 4G B.S. these clowns are starting to get sneaky. the ones i got are pictured on their website when you punch in that part#. i'd send them a pic of what you got and ask for the right part or a refund.

I contacted FourGreen about this... here is my email and their response:


Dear Jesse ,

We will send you a replacement as soon as possible am very sorry for this fault .




Thanks

Zein
[IMG]mailbox:///C:/Users/tr1x/AppData/Roaming/Thunderbird/Profiles/w7lpwvl2.default/Mail/inbound.att.net/Inbox?number=21219364&part=1.2&filename=im age001.jpg[/IMG]
USA Mobile: +1(313)6389978
Office in Korea : +82-2-2212-9484
Mobile : +82-10-6431-4920
zein@fourgreen.com

http://www.fourgreen.com/

http://stores.ebay.com/FourGreenAuto

FourGreen on AMAZON



Sent: Saturday, March 29, 2014 1:23 AM
To: Abbas Elzein
Subject: Correct part number ordered but part is not the same as pictured or previously ordered.



Dear Zein,
I have a complaint from a member who asked me to order part number K817369470B89 on order number FG-94337.
The part received is not like the part pictured on your web site. Another member had
ordered this part in a prior order and received the handle assist that is pictured on
your web page so we expected this one to be the same.

The handle the member received (with the same part number K817369470B89) is not
the one pictured . It requires two separate caps to cover the screws rather than the
one long cap that is the length of the entire handle. In addition, there were no
caps to cover the screw holes included in the package.
What can be done to fix this problem?
Thanks,
Jesse

[bravekozak]

twist, maybe I ordered the cap for the wrong handle?
I was hoping for a cover for the long armrests, where the power window controls snap in. Instead, 1990new's pics show a small square cap. I will examine them on Monday when I pick them up. If they aren't what I need, I will ship them to you.